REDELL OF FUJIAN ELECTRONIC TECHNOLOGY CO. LTD DM-1260 User Manual
12
13
Serial number
Part name
Serial number
Part name
1
2
3
4
5
6
7
8
9
10
11
12
SK2 bottom key
Microphone
Speaker
Earphone Headset
Channel switch
Volume / power switch
Battery
Antenna
Belt clamp
Indicator light
PTT Key
SK1 Upper key
%87721'(6&5,37,21
-2-
POWERING ON
¾
Start up:
¾
Shutdown:
CHANNEL SWITCHING
¾
VOLUME ADJUSTING
¾
¾
RECEPTION AND EMISSION
¾
Receive
:
¾
Emission:
Turn on the intercom and switch to the corresponding
channel. Press PTT, the red light of the indicator
lights up, which means that the transmitter enters
the transmitter, and the microphone is 5-10
centimeters in order to speak. Loosen the PTT,
and the device returns to standby mode.
channel. Press PTT, the red light of the indicator
lights up, which means that the transmitter enters
the transmitter, and the microphone is 5-10
centimeters in order to speak. Loosen the PTT,
and the device returns to standby mode.
Turn on the intercom, switch to the corresponding
channel, that is to enter the channel standby state.
When the signal is received, the green light is
switched on and the volume of the loudspeaker is
adjusted to the proper value.
channel, that is to enter the channel standby state.
When the signal is received, the green light is
switched on and the volume of the loudspeaker is
adjusted to the proper value.
When the interphone turns on the power supply, the
loudspeaker rotates clockwise and the sound becomes larger.
Turn the speaker counterclockwise and make the
sound smaller.
loudspeaker rotates clockwise and the sound becomes larger.
Turn the speaker counterclockwise and make the
sound smaller.
Rotating the channel knob, the white screen printing
on the knob cap aligned to the number printed on the
shell, that is, switch to the corresponding channel.
During switching, the indicator light orange, switch to
complete the channel prompt tone, and indicate the
lights out.
on the knob cap aligned to the number printed on the
shell, that is, switch to the corresponding channel.
During switching, the indicator light orange, switch to
complete the channel prompt tone, and indicate the
lights out.
Turn the volume switch counterclockwise, until the
"bang" sound is heard, the intercom power switch is
switched off, and the interphone is turned off.
"bang" sound is heard, the intercom power switch is
switched off, and the interphone is turned off.
Clockwise turn the volume switch knob, hear "bang"
sound, the top of the indicator light orange, the speaker
has the starting prompt sound. When the orange indicator
lights out and the channel prompt tone is issued, it shows
that the interphone is started normally. The boot time
is about 8 seconds.
sound, the top of the indicator light orange, the speaker
has the starting prompt sound. When the orange indicator
lights out and the channel prompt tone is issued, it shows
that the interphone is started normally. The boot time
is about 8 seconds.
%$6,&23(5$7,216
-3-