E G O Elektro-Geraetebau GmbH SOC-0001 User Manual
technical customer documentation
company: 0082 / E.G.O. Sales Germany (E.G.O. Elektro-Geräte AG, Zweigniederlassung Vertrieb, Deutschland)
function: 12 / product management
function: 12 / product management
document id.: 90.60096.043-001-00-A / state: 230 - released
designation: User's Manual Simple Oven Control
page 26 of 31
Note:
If BLE mode is enabled
and
at minimum 1 mobile device has been paired and bonded
and
is in RF range
with the appliance, the connectivity Icon
is shown permanent in the display.
1.4.5 Out of Range
Once the mobile device comes out of the Bluetooth range, the connectivity symbol will disappear.
1.4.6 Reconnect
If a known mobile device comes back in Bluetooth range, this will be automatically re-connected and the
connectivity symbol appears.
connectivity symbol appears.
1.4.7 Bonding and Pairing an Additonal Mobile Device
Follow the procedure as described in chapter 1.4.3.
1.4.8 Number of Bonded Devices Exceeded
Maximum 4 mobile devices can be bonded to a Simple Oven Control. If 4 mobile devices are already
bonded, it is not possible to bond an additional one. Trying this, the display will show “FuLL” and no pairing
process will be started.
bonded, it is not possible to bond an additional one. Trying this, the display will show “FuLL” and no pairing
process will be started.
Now there are 2 possibilities: Abort Pairing Process (see chapter 1.4.9) or Delete Bonded Devices and Start
New Pairing (see chapter 1.4.10).
1.4.9 Abort Pairing Process
If no button is pressed within a timeout of 30 seconds or a manual abort according to chapter 1.4.13 is done,
pairing is aborted and connectivity settings are left. The display returns to the previous display before
entering the setting menu. The already bonded devices remain stored.
pairing is aborted and connectivity settings are left. The display returns to the previous display before
entering the setting menu. The already bonded devices remain stored.
1.4.10
Delete Bonded Devices and Start New Pairing
Pressing button “T” together with the button “On/Off” and hold for additional 5 seconds, all already bonded
mobile devices will be deleted and the appliance control starts advertisement by searching for new devices
as described in chapter 1.4.4.
mobile devices will be deleted and the appliance control starts advertisement by searching for new devices
as described in chapter 1.4.4.