Liftup A/S REMOTE2 User Manual
14
Liftup Inc. | 4809 Ehrlich Road | Suite 105 | FL – 33624, Tampa | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
———————————— USER MANUAL – REMOTE2 – US VERSION 1.0
Notice statements according to CFR 47 Part 15.19 / RSS-GEN:
The REMOTE2 product complies with Part 15 of the FCC rules and with Industry Canada license
exempt standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
The REMOTE2 product complies with Part 15 of the FCC rules and with Industry Canada license
exempt standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Déclarations selon le CFR 47 section 15.19 / RSS-GEN:
Le présent REMOTE2 appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) L'appareil ne doit pas produire de brouillage, et
(2) L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
NOTICE statements according to CFR 47 Part 15.21:
Changes or modifications made to this equipment not expressly approved by Liftup A/S may
void the FCC authorization to operate this equipment.
Statements according to CFR 47 Part 2.1091/2.1093 and OET bulletin 65/RSS- 102:
The REMOTE2 and REMOTE1 products are SAR test excluded according to FCC KDB 447498,
RSS102 and EN 62479 at separation distances larger than 5 mm and less than 50 mm with
respect to the human body as the maximal radiated power is below the limits.
The REMOTE2 and REMOTE1 products are by declaration of RF Exposure Compliance for
Exemption from Routine Evaluation Limits according to RSS102
ATTESTATION:
It is attested that the radio communication apparatus meets the exemption from the routine
evaluation limits in RSS102 Section 2.5 of this standard; that the Technical Brief was prepared
and the information contained therein is correct; that applicable measurement methods and
evaluation methodologies have been followed; and that the device meets the SAR and/or RF
field strength limits of RSS-102.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
SAR test exclusion according to EN 62479
The REMOTE2 and REMOTE1 products are compliant according to EN 62479 as the output
power is less than 20 mW.
AUS/NZ:
• The REMOTE2 complies with the AS/NZS 4268 requirements for 2.4 GHz transceiver.
• The REMOTE2 complies with the AS/NZS 4268 requirements for 2.4 GHz transceiver.
Enjoy your new REMOTE2
Best regards,
Liftup Inc.