D-Parts Mobilphon & Zubehoer GmbH RX4 User Manual

● Instruction Manual and

Warranty Information

Introduction

The B-Speech® RX4 offers the latest in
Bluetooth® technology
The B-Speech® RX4 Receives Music Data
from players which are compatible with
Bluetooth® with A2DP Profile.
The B-Speech® RX4 can be used with any
audio Player or Speaker with a 3.5 mm or
Cinch audio input.

User Manual

Getting started

Turning B-Speech® RX4 On/Off

The B-Speech® RX4 is turned on by pressing the On/Off button for 4

Seconds. The blue LED will light up.

The B-Speech® RX4 is turned off by pressing the On/Off button for

about 5 seconds; the blue LED will go off.

Note: Read the user guide of your Bluetooth® transmitter to

find out how to turn it on / off.

Pairing

Pairing the B-Speech® RX4 with Bluetooth® Audio source "Pairing"

means establishing a wireless connection between the Bluetooth® audio

source and the B-Speech® RX4. To be able to use B-Speech® RX4 with

a audio source, you need to pair them.

After pairing, you can use B-Speech® RX4 with your Bluetooth® Audio

source.

The pairing process in detail

1. Before pairing, please check that both devices are fully charged.

2. Ensure that there is no other active Bluetooth® device around.

3. Turn the RX4 ON by pressing the On / Off button for 7 Seconds.

The red/blue LED will flash alternately,RX4 is in pairing mode.

1. On / Off switch
2. LED indicator
(under the cover)
3. 180° swivel 3,5 mm
connector

1. Connect the cable charger mini USB

plug to the mini USB input of the B-Speech®

RX4.

2. Connect the USB plug on the other end

of the cable charger to the USB input of

your PC or laptop. The LED lights up

during charging.

3. When charging is done, the LED will go

off.

4. Remove the cable charger

B-Speech® Stereo Receiver RX4

B-Speech ® RX4

User Manual

package contents

RX4

Charging the Unit

Overview