Shenzhen Baoan Fenda Industrial Co. Ltd. BT118 User Manual
WIRELESS OUTDOOR SPEAKER
OPERATION MANUAL
FOR LISTENING THIS REPRODUCED NA TURAL SOUND IN YOUR LIFE RESPECTFULLY
WWW.BEAUTYSPEAKER.COM
audio amplifier
BT118
audio amplifier
audio amplifier
audio amplifier
audio amplifier
Volume
Power
Bass
Lights
1
19
20
17
18
21
22
23
24
25
8
7
11
10
9
6
4
5
3
2
1 .................
System/Main Unit
2..................
Tremble Speaker
3..................
Bass Speaker
4..................
Volume Control
5..................
Power Control
6..................
Bass Increase Control
7..................
Display Light Control
8..................
Volume Control Indicator
9..................
Power Control Indicator
10..................
Bass Amplifier Indicator
11..................
Display Light Indicator
17..................Transmitter
18..................Transmitter Indicator
19..................Audio Input
20..................DC Power In
21..................
(OFF/CH1/CH2/CH3)Transmitter Control
22..................Transmitter Adaptor (Small)
23.................. System Adaptor (Large)
24.................. L shape Cable
25.................. RCA Cable
Off
1
2
3
DC12V
L
Line in
R
Off
1
2
3
DC12V
L
Line in
R
12..................Battery Cover
13..................Battery Cover Lock
14..................Receiver Channel Selector (3CH)
15..................DC Power In
16..................AUX In
14
13
15
16
12
audio amplifier
audio amplifier
1
2
3
4
5
6
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Congratulations on your purchase of this outdoor wireless audio system.
Before you use, please read this manual carefully. It contains important
operating instructions
Before you use, please read this manual carefully. It contains important
operating instructions
* Do not expose the system in extremely hot or humid environment. Furthermore, do not place the system in
storm. If you are not going to use the system for a long time, ensure to disconnect it from the wall outlet
or remove battery.
* Place the system in a flat, dry surface with adequate ventilation.
* Please use good quality battery and do not mix new and old batteries. To prevent possible hazard, do not
dispose battery in the fire. The battery must be recycled or disposed properly.
* Please use enclosed AC adapter (Universal).
* To avoid the risk of electric shock, do not remove cover (or back). Refer servicing to qualified personnel only.
storm. If you are not going to use the system for a long time, ensure to disconnect it from the wall outlet
or remove battery.
* Place the system in a flat, dry surface with adequate ventilation.
* Please use good quality battery and do not mix new and old batteries. To prevent possible hazard, do not
dispose battery in the fire. The battery must be recycled or disposed properly.
* Please use enclosed AC adapter (Universal).
* To avoid the risk of electric shock, do not remove cover (or back). Refer servicing to qualified personnel only.
Warning:
Special
Features:
Features:
* The system is equipped with high quality amplifier and speakers. This provides clarity in tremble, well-rounded
in mid tone, and powerful in bass. This will easily meet your expectation on sound quality.
* Three-channel selection on both the system and signal transmitter allows direct connection to any sound frequency
or input from any wireless signal transmitter. The valid transmitting distance is 150 feet. (Under no obstacles)
* The system is equipped with power saving function. When battery is low, the power light on the system will turn
to pink and change to power saving mode.
* Control panel is made with soft touch buttons. All buttons are lighted for easy operation.
in mid tone, and powerful in bass. This will easily meet your expectation on sound quality.
* Three-channel selection on both the system and signal transmitter allows direct connection to any sound frequency
or input from any wireless signal transmitter. The valid transmitting distance is 150 feet. (Under no obstacles)
* The system is equipped with power saving function. When battery is low, the power light on the system will turn
to pink and change to power saving mode.
* Control panel is made with soft touch buttons. All buttons are lighted for easy operation.
Components
:
System Unit
1
Connecting Cord
2
AC Adapter
2
Signal Transmitter
1
Instruction Manual
1
Warranty Card
1
Functions:
Functions:
System Setups:
System:
The system can connect directly to devices
with audio output such as Ipod, DVD, VCD. CD,
and MP3 thru AUX IN. Once those devices are
connected, signals will not be accepted from the
transmitter.
The system can connect directly to devices
with audio output such as Ipod, DVD, VCD. CD,
and MP3 thru AUX IN. Once those devices are
connected, signals will not be accepted from the
transmitter.
Signal Transmitter Setups:
Signal Transmitter:
Allow direct connection to devices with audio output
functions such as Ipod, DVD, VCD, CD, and MP3.
Allow direct connection to devices with audio output
functions such as Ipod, DVD, VCD, CD, and MP3.
System
Specifications:
Specifications:
Power Output:
..............................................................(THD10%) 15W+3W
Frequency Response: ............................................................ 80HZ-20KHZ(6dB)
Carrier Frequency ...................................................................................925.8 - 927.4 MHz
Power Source ......................... Unregulated 12V DC, Center Tip set to positive (+), 100mA
Modulation Method ........................................................................................FM Modulation
AUX Input Sensitivity:
.................................................................................1000MV
Noise Ratio: .......................................................................................75dB
Tremble Speaker Dimension: ............................................................................................5”
Bass Speaker Dimension: .........................................................................................1.5”
Speaker Impedance: .....................................................................................4ohmz
Dimensions: ..................................................................H360* W210*L230
Battery Specification: .............................................................................................D
Weight: ..........................................................................................3kg
audio amplifier
audio amplifier
7
8
Setup
Instruction:
Instruction:
1
.Connect the power adaptor of the system to AC wall outlet and place the other end to DC output at
the back of the system. If use battery, place batteries in compartment. If both batteries and AC power
are in place, the system will automatically obtain electricity from the AC outlets.
are in place, the system will automatically obtain electricity from the AC outlets.
2
.Connect the power adaptor of the signal transmitter to wall outlets and place the other end to DC
output at the back of the transmitter. According to the color coding on the cable, connect RCA cable
to Line In. Turn on the power. Select a channel. The signal transmitter is functioning properly
when you see the transmitter indicator is lighted.
to Line In. Turn on the power. Select a channel. The signal transmitter is functioning properly
when you see the transmitter indicator is lighted.
3. Press the power switch on the system to turn on. You should see the indicator light is on. Select
channel on the system to be the same as the one on the signal transmitter. For example, if the
system is on Channel 1, transmitter channel should be also on 1. At this time, the system will play
the same music as those input to the signal transmitter.
channel on the system to be the same as the one on the signal transmitter. For example, if the
system is on Channel 1, transmitter channel should be also on 1. At this time, the system will play
the same music as those input to the signal transmitter.
Setup
Instruction:
Instruction:
4
. Adjust volume accordingly. You can also adjust bass level via bass increase control.
5. If the system is used at night, it can be easily identified by the blue light placed on the system.
6. If no transmitter is not in use, other electronic devices can be connected to the system directly via
AUX IN. When that happens, signals will not be accepted from the transmitter.
AUX IN. When that happens, signals will not be accepted from the transmitter.
7. The system is equipped with power saving function. When battery is low, the system will assume
in the battery save mode. The power indicator light will turn to pink and volume will be turned down
automatically. Increasing volume will have no effect until battery is consumed completely.
in the battery save mode. The power indicator light will turn to pink and volume will be turned down
automatically. Increasing volume will have no effect until battery is consumed completely.
FCC
Information
Information
FCC
Information
Information
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including interference
that may cause undesired operation.