Zebra 01406-000 User Manual
23
Operation
Self-Test Printout
03/03/2009
TTP 1020™/TTP 1030™ Technical Manual
P1003643-001
Self-Test Printout
Is a power button available for the printer?
If…
Then…
No
a.
Lift the printhead.
b.
Hold the FF-button pressed while lowering the head.
c.
An auto load of paper will be done, and then a self-test printout will be
printed.
printed.
Yes
a.
Remove power from the printer.
b.
Hold the feed-forward button depressed while powering ON the printer.
Keep the button depressed for at least 5 seconds.
Keep the button depressed for at least 5 seconds.
c.
The above step produces a printout showing the firmware program version
and date, hardware revision number, serial number of the control board,
name of the font used on the test printout and the burn time used by the print
head.
and date, hardware revision number, serial number of the control board,
name of the font used on the test printout and the burn time used by the print
head.
d.
Each successive press of the button will produce a test printout.
e.
Remove and then reapply power to the printer again to exit self-test mode.