Zebra 01406-000 User Manual
03/03/2009
TTP 1020™/TTP 1030™ Technical Manual
P1003643-001
7
Interfaces
Parallel Interface (TTP 1020)
The IEEE-1284 standard defines 5 modes of operation:
• Compatibility Mode.
• Nibble Mode.
• Byte Mode (protocol not implemented in TTP 1020).
• EPP Mode, Enhanced Parallel Port.
• ECP Mode, Extended Capabilities Port (protocol not yet implemented in TTP 1020).
Error Signaling
These errors sets the _Fault signal:
• Head lifted
• Cutter not home
• Out of paper
This error sets the Paper Out/End (PE):
• Out of paper
Caution •
Always use Zebra-approved interface cables to avoid excessive EMI and
potentially voiding the printer EMC certifications.
Note •
If you use the printer through a Windows driver, you need not read this chapter.
Note •
If you intend to use any other mode than Compatibility Mode, we recommend you to
get the documents for the IEEE-1284 standards, and study them thoroughly.