Zebra 01406-000 User Manual
73
Interfaces
Serial (TTP 1030)
03/03/2009
TTP 1020™/TTP 1030™ Technical Manual
P1003643-001
Serial (TTP 1030)
The RS-232 serial interface has a transfer speed of between 2 400 and 115 200 bits/s.
This relatively low transfer speed limits the graphics printing speed drastically. Printing full-
width graphics with 115 200 bits/s result in printing speeds of about 45 mm/s.
width graphics with 115 200 bits/s result in printing speeds of about 45 mm/s.
The serial interface is best fitted for applications where text-only receipts are to be printed, and
where serial interface is the only option available on the host computer.
where serial interface is the only option available on the host computer.
Figure 18 • Serial interface cable. The printer can use dashed leads in non-
Windows systems. Dotted leads are not connected in the printer. To be able to
connect the cable in any direction, make symmetrical cables.
Setup Options
See also:
.
Note •
The cable for other Zebra products like the TTPM2, CPM, TTP101 and TTP5000
series, is NOT compatible with this cable.
Printer
PC
Female
5
GND
GND
5
2
RxD
RxD
2
3
TxD
TxD
3
9
RI
RI
9
6
DSR
DSR
6
8
CTS
CTS
8
4
DTR
DTR
4
7
RTS
RTS
7
1
DCD
DCD
1
5
9
4
8
3
7
2
6
1
Female
5
9
4
8
3
7
2
6
1
Baud:
2 400, 4 800, 9 600, 19 200, 38 400, 57 600, 115 200 bits/s
Flow control:
None, Xon / Xoff, or Hardware
Data bits:
7/8
Stop bits:
1 (fixed)
Parity:
None, Odd, or Even
Default settings:
9600 bits/s, 8-bits, No parity, 1 stop bit, and no flow control.