Dataram DRH1066R DRH1066R/8GB Leaflet
Product codes
DRH1066R/8GB
DRH1066R
DDR3-1066, PC3-8500, Registered, ECC, 1.5V, 240-pin DIMMs
DRH1066R
10-Feb-11
Products in Family
DRH1066RQ/4GB (1 x 4GB 4Rx8 DIMM)
DRH1066R/8GB (1 x 8GB 2Rx4 DIMM)
DRH1066RQ/16GB (1 x 16GB 4Rx4 DIMM)
DRH1066R/8GB (1 x 8GB 2Rx4 DIMM)
DRH1066RQ/16GB (1 x 16GB 4Rx4 DIMM)
Features Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.181” x 5.25”)
Data Transfer Rate: 10.6 Gigabytes/sec
Operating Voltage: 1.5 V ±0.075
Fully RoHS Compliant
Thermal Sensor
133.35 mm wide by 30 mm high (1.181” x 5.25”)
Data Transfer Rate: 10.6 Gigabytes/sec
Operating Voltage: 1.5 V ±0.075
Fully RoHS Compliant
Thermal Sensor
Each DRH1066R upgrade consists of a single DDR3-
1066 Registered ECC DIMM that conforms to JEDEC’s
DDR3, PC3-8500 standard. One 2K-bit EEPROM is used
for Serial Presence Detect and a combination
register/PLL with Address and Command Parity is also
used. A thermal sensor accurately monitors the DIMM
module and can prevent exceeding the maximum
operating temperature of 95C.
1066 Registered ECC DIMM that conforms to JEDEC’s
DDR3, PC3-8500 standard. One 2K-bit EEPROM is used
for Serial Presence Detect and a combination
register/PLL with Address and Command Parity is also
used. A thermal sensor accurately monitors the DIMM
module and can prevent exceeding the maximum
operating temperature of 95C.
Dataram Product
HP Product
Supported in these HP systems:
DRH1066RQ/4GB
DRH1066R/8GB
DRH1066RQ/16GB
DRH1066R/8GB
DRH1066RQ/16GB
500600-B21
516423-B21
500666-B21
516423-B21
500666-B21
HP ProLiant BL2x220c G6/G7, BL280c G6, BL460c G6,
BL490c G6, BL620c G7, BL680c G7, DL160se G6,
DL160 G6, DL180 G6, DL320 G6, DL360 G6, DL370 G6,
DL380 G6, DL580 G7, ML150 G6, ML330 G6, ML350
G6, ML370 G6, SL160z G6, SL170z G6, SL2x170z G6,
WS460c G6
BL490c G6, BL620c G7, BL680c G7, DL160se G6,
DL160 G6, DL180 G6, DL320 G6, DL360 G6, DL370 G6,
DL380 G6, DL580 G7, ML150 G6, ML330 G6, ML350
G6, ML370 G6, SL160z G6, SL170z G6, SL2x170z G6,
WS460c G6
Note: Not all products supported in all systems. See HP or Dataram
websites for specific memory options for your model.
websites for specific memory options for your model.
Notes
Tolerances on all dimensions
except where otherwise
indicated are
except where otherwise
indicated are
±.13 (.005).
All dimensions are expressed
in millimeters [inches]
in millimeters [inches]
Copyright
© 2011 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.