Canary GFT-1055 User Manual
Gigabit Ethernet Copper-to-Fiber Converters
GFT-10W-XX – UTP to Single-mode with ITU-specified CWDM wavelengths
•
1000BASE-T Autonegotiation for Full-duplex and Half-
duplex operation with Flow-Control and;
•
Switch selectable, Fiber-Port Autonegotiation for common,
end-to-end Flow-Control, and link awareness, or for blind
connection to Gigabit fiber ports on older switches
•
Internal Auto-sensing, MDI / MDI-X crossover switch for
Network Interface Card or Switch connections
•
Dual power jacks for connecting optional, redundant power
supply
•
Optional: UK, Continental European power
•
Auto-sensing 100/240 VAC power supply
•
Transmits individual ITU specified CWDM wavelengths
•
Transparent to Flow-Control commands such as PAUSE
•
A full array of status / diagnostic LEDs
Ordering Information
Gigabit Ethernet
Media
Min. Tx
Max. Tx
Rx
Min. PWR
Max.PWR
Max. Input
Connector
Wavelengths
Transmit
Model Numbers
Types
PWR
PWR
Sensitivity
Budget
Budget
PWR
Type
(ηm)
Distance
GFT-10W-XX *
UTP / SM
-5.0 dBm
0.0 dBm
-22.0 dBm
17.0 dB
22.0 dB
-3.0 dBm
SC
CWDM
40 Km
GFT-10W-XXE6
UTP / SM
0.0 dBm
5.0 dBm
-24.0 dBm
24.0 dB
29.0 dB
-3.0 dBm
SC
CWDM
60+ Km
GFT-10W-XXE8
UTP / SM
dBm
dBm
dBm
dB
dB
dBm
SC
CWDM
80 Km
* NOTE 1: W-XX designates one of eighteen CWDM optical transmission wavelengths (λ) e.g. GFT-10W-47=1470ηm or GFT-10W-61=1610ηm transmission.
Please refer to other CWDM (Coarse Wavelength Division Multiplexing Data Sheets for additional information.
Please refer to other CWDM (Coarse Wavelength Division Multiplexing Data Sheets for additional information.
* NOTE 2: Canary CWDM standalone converters are available as card modules for the CCM-1600 and SNMP manageable CCN-2000 / CCN-0400 Chassis models.
Please refer to the CCM-1600 and CCN-2000 / CCN-0400 Data Sheets for more information.
Please refer to the Standalone / Rackable CWDM data pages for information on Passive Optical Multiplexer / De-Multiplexers and OADMs.
Please refer to the CCM-1600 and CCN-2000 / CCN-0400 Data Sheets for more information.
Please refer to the Standalone / Rackable CWDM data pages for information on Passive Optical Multiplexer / De-Multiplexers and OADMs.
There are eighteen CWDM wavelengths (λs) specified. Eight standard wavelengths plus four O-band λs are usable over most standard single-mode fiber.
Canary offers products for the standard eight wavelengths plus four O-band λs: 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 ηm + 1290, 1310, 1330, 1350 ηm
Canary offers products for the standard eight wavelengths plus four O-band λs: 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 ηm + 1290, 1310, 1330, 1350 ηm
More versions of the GFT-10W-XX series may be found on the Canary web site as they become available.
Canary’s GFT-10W-XX series of Gigabit Coarse Wavelength Division
Multiplexing (CWDM) converters provide an economical way to
launch Gigabit Ethernet data for transport through CWDM
Multiplexers and provide access to high capacity CWDM based
networks.
Coarse Wavelength Division Multiplexing reduces network
congestion with a minimum infrastructure investment. Using discrete
wavelengths (one per channel), multiple data channels can be
transported in parallel over a single-mode fiber cable.
GFT-10W-XX CWDM converters are designed to meet industry
needs for an efficient way to access CWDM point-to-point campus
and metro-ring networks. They are used with Main Distribution
Frame (central office) Multiplexers and with remote site Optical Add/
Drop Multiplexers (OADMs) to insert and/or drop optical traffic
from single-mode fiber segments. Specific models provide
transmission on one of eighteen discrete λs, each an ITU specified,
CWDM wavelength. Versions are available for either 40+ or 60+
CWDM wavelength. Versions are available for either 40+ or 60+
Kilometer transmission distances.
CWDM converters are functionally identical to standard units with
the exception that units at opposite ends of a fiber link must be
models with identical wavelengths in order to maintain a common
channel link e.g. if one device is operating at 1470 ηm, the second
must transmit and receive on the same wavelength. Similarly, a
must transmit and receive on the same wavelength. Similarly, a
standalone 1470 ηm unit can be connected to a CCM-1600 or
CCN-2000 / CCN-0400 chassis module with the same wavelength.
CCN-2000 / CCN-0400 chassis module with the same wavelength.
Optical Specifications