Dataram DRH165G7R/16GB Leaflet
DRH165G7R
DDR3-1066/1333, PC3-8500/10600, Registered, ECC, 1.5V, 240-pin DIMMs
DRH165G7R
26-Aug-10
Products in Family
DRH165G7R/4GB (1 x 4GB 1Rx4 DIMM)
DRH165G7R/8GB (1 x 8GB 2Rx4 DIMM)
DRH165G7R/16GB (1 x 16GB 4Rx4 DIMM)
DRH165G7R/8GB (1 x 8GB 2Rx4 DIMM)
DRH165G7R/16GB (1 x 16GB 4Rx4 DIMM)
Features Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.181” x 5.25”)
Data Transfer Rate: 10.6 Gigabytes/sec *
Operating Voltage: 1.5 V ±0.075
Fully RoHS Compliant
Thermal Sensor
133.35 mm wide by 30 mm high (1.181” x 5.25”)
Data Transfer Rate: 10.6 Gigabytes/sec *
Operating Voltage: 1.5 V ±0.075
Fully RoHS Compliant
Thermal Sensor
* The DRH165G7R/16GB has a data transfer rate of 8.53 Gigabytes/sec
Each DRH165G7R upgrades consists of a single DDR3-
1333 Registered ECC DIMM that conforms to JEDEC’s
DDR3, PC3-10600 standard*. One 2K-bit EEPROM is
used for Serial Presence Detect and a combination
register/PLL with Address and Command Parity is also
used. A thermal sensor accurately monitors the DIMM
module and can prevent exceeding the maximum
operating temperature of 95C.
1333 Registered ECC DIMM that conforms to JEDEC’s
DDR3, PC3-10600 standard*. One 2K-bit EEPROM is
used for Serial Presence Detect and a combination
register/PLL with Address and Command Parity is also
used. A thermal sensor accurately monitors the DIMM
module and can prevent exceeding the maximum
operating temperature of 95C.
* The DRH165G7R/16GB is a DDR3-1066, PC3-8500 DIMM
Dataram Product
HP Product
Supported in these HP systems:
DRH165G7R/4GB
DRH165G7R/8GB
DRH165G7R/16GB
DRH165G7R/8GB
DRH165G7R/16GB
593911-B21
593913-B21
593915-B21
593913-B21
593915-B21
HP ProLiant BL465c G7, BL685c G7, DL165 G7, DL385
G7, DL585 G7, SL165z G7
G7, DL585 G7, SL165z G7
Note: Not all products supported in all systems. See HP or Dataram
websites for specific memory options for your model.
websites for specific memory options for your model.
Notes
Tolerances on all dimensions
except where otherwise
indicated are
except where otherwise
indicated are
±.13 (.005).
All dimensions are expressed
in millimeters [inches]
in millimeters [inches]
Copyright
© 2010 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.