IMC Networks IE-iMcV-MultiWay 858-18121 Leaflet
Product codes
858-18121
800-624-1070
www.imcnetworks.com
M
edia
C
onversion
RoHS Compliant
Features and Benefits
Flexible Solution
• Copper to fiber SFP media converter
• Dual-independent copper to fiber SFP
media converter(s)
• Fiber repeater
• SFP to SFP mode converter with copper
drops (Re-amplify, Re-shape, Re-time)
• 4-Port Gigabit Switch
• 1+1 uplink protection (<50 mSec)
• Supports per port service VLAN
• Supports daisy chain expansion
• Supports RMON Statistics
• Supports Jumbo Frames (up to 10240 bytes)
• Modular form factor
• Modular form factor
Advanced Remote Monitoring/
Management
• Supports IEEE 802.3ah OAM (active/passive),
and 802.1ag CFM (Connectivity Fault
Management) on all ports
• Discovery, Link Monitoring, Performance
Monitoring and Remote Loopback
• Via UMA, can act as a Remote when
connected to a Host iMcV-Giga-FiberLinX-II
• Generates SNMP TRAPs based on events
• RS-232 CLI (Command Line Interface)
console port
SFP Support
• Auto negotiate speed and flow control for
10/100/1000 copper SFPs with SGMII
• Supports fixed speed 1 Gbps full-duplex
copper SFPs
• Auto detect for 100 or 1000 optical SFPs
“Industrial Ethernet” (IE) Features
• Extended temperature functionality,
up to -40° to +85° C
• Powering options include redundant
internal AC powered chassis
Modular 10/100/1000 Mbps Ethernet Media/Mode Converter
IE-iMcV-MultiWay
A Compact, Versatile,
SNMP Managed Gigabit
Ethernet Module
The IE-iMcV-MultiWay is a modular, CPE device providing two
fixed 10/100/1000Base-T copper ports and 2 SFP ports. The SFP
ports support fiber or copper SFPs. A console port and on-board
DIP Switches provide configuration and mode options for the
module. The IE-iMcV-MultiWay provides OAM functionality
with 802.3ah and 802.1ag support on each port. As an Industrial
Ethernet device, it supports an extended temperature range of
-40° to +85° C.
fixed 10/100/1000Base-T copper ports and 2 SFP ports. The SFP
ports support fiber or copper SFPs. A console port and on-board
DIP Switches provide configuration and mode options for the
module. The IE-iMcV-MultiWay provides OAM functionality
with 802.3ah and 802.1ag support on each port. As an Industrial
Ethernet device, it supports an extended temperature range of
-40° to +85° C.
There are four distinct DIP Switch selectable configurations
that the IE-MultiWay supports. Among them are a 1+1 Uplink
Protection Switch, a 4-Port Gigabit Switch, and a Dual Copper
to Fiber SFP Media/Mode Converter (two gigabit fiber media
converters in one).
that the IE-MultiWay supports. Among them are a 1+1 Uplink
Protection Switch, a 4-Port Gigabit Switch, and a Dual Copper
to Fiber SFP Media/Mode Converter (two gigabit fiber media
converters in one).
As a 4-port device, it can be deployed with fiber redundancy
(with or without 1+1 uplink protection) and status monitoring
with management on all ports via SNMP, which now offers OAM
for mission-critical applications. It can also be installed as dual
10/100/1000 Mbps copper to fiber media converter and be
utilized as two separate converters.
(with or without 1+1 uplink protection) and status monitoring
with management on all ports via SNMP, which now offers OAM
for mission-critical applications. It can also be installed as dual
10/100/1000 Mbps copper to fiber media converter and be
utilized as two separate converters.
The IE-iMcV-MultiWay supports 10/100/1000 Mbps and 1 Gbps
copper and 100 Mbps and 1 Gbps optical SFP modules, to
provide greater flexibility in the network environment. The hot-
swappable nature of SFPs and the numerous fiber modes and
types that are available allow for easy configuration and future
upgrading as network demands evolve.
copper and 100 Mbps and 1 Gbps optical SFP modules, to
provide greater flexibility in the network environment. The hot-
swappable nature of SFPs and the numerous fiber modes and
types that are available allow for easy configuration and future
upgrading as network demands evolve.
The IE-iMcV-MultiWay offers a full feature set including Auto
Negotiation, Selective Advertising, AutoCross (on copper ports),
VLANs, loopback testing and OAM. Software updates can be
downloaded through TFTP or iView
Negotiation, Selective Advertising, AutoCross (on copper ports),
VLANs, loopback testing and OAM. Software updates can be
downloaded through TFTP or iView
2
(iConfig view).