Transition Networks SDSFE3110-120 Leaflet

Page of 1
Industrial
Specifications
Standards 
 
EIA/TIA RS-232/422/485, EIA/TIA-574,    
 
 
IEEE Std. 802.3
Data Rate 
 
Serial: 115 Kbps 
 
RJ-45: 10/100 Mbps
Drivers 
 
Windows 95, 98, ME, 2000, 2003, XP, NT 4.0 
 
Microsoft NT/2000/2003 Terminal Server
Switches  
Switch 1: ON = console serial port (RS-232);  
 
OFF = data serial port 
 
Switch 2: RS-232 mode on/off 
 
Switch 3: RS-422/485 (4-wire) mode on/off 
 
Switch 4: RS-485 (2-wire) mode on/off 
 
Switch 7: Termination resistor on/off
Status LEDs 
 
PWR (Power): ON = power connected 
 
100 (RJ-45): ON = Link at 100 Mbps 
 
LNK/ACT (RJ-45): ON = UTP link;  
 
 
 
FLASHING = activity 
 
POST: ON = Power On Self Test successful 
 
ACT (serial): ON = Serial link 
 
FLASHING = activity
Dimensions 
 
Width: 3.5”  [90 mm] 
 
Depth: 4.3”  [109 mm] 
 
Height: 1.3”  [32 mm]
Input Power 
 
External AC/DC; 9 to 32  VDC, 0.8A
Environment 
 
0 to +50°C std. Operating temp.  
 
5 – 90% humidity non-condensing;  
 
0 – 10,000 ft. altitude
Shipping Weight 
 
2 lb. [0.90 kg]
Compliance 
 
CISPR22/EN55022 Class A + EN55024; EN60950  
 
 
Class A; FCC Class A; CE Mark
Warranty 
 Lifetime 
SDSFE3110-120
SDSFE3110-120
stand-alone industrial device server
Device Ser
ver RS232/422/485 to 10/100BASE-TX
Remotely Managed Device Server
Transition Networks’ Device 
Servers provide a serial-to-Ethernet 
conversion to enable customers to 
integrate any legacy serial-based 
device into their Ethernet networks.
Network-enable serial based devices 
quickly and cost-effectively with 
these serial-to-Ethernet device serv-
ers.  The device server can connect 
to RS-232, RS-422 or RS-485 serial 
ports and provides a 10/100BASE-TX 
Ethernet connection.
Features
4
AutoCross™ 
4
Auto-Negotiation 
4
Remote Management 
4
Supports asynchronous serial  
    data rates up to 115 Kbps
4
Supports RS-232,  
    4-wire RS-422  
    or 2/4-wire RS485 operation
4
Control up to 4,096 virtual COM  
    ports from one PC
4
DIN Rail Mounting  
    Brackets included
Network Enable Serial Devices
Ordering Information
SDSFE3110-120
 DB-9 
[15 m/49 ft.]*
to  RJ-45 [100 m/328 ft.]
*Max. distance on the serial port is  
 dependent on protocol: 
    15 m/49 ft. (RS-232) 
    1.2 km/0.7 mi. (RS-422/485)
Device Ser
ver RS232/422/485 to 10/100BASE-TX