Manualsbrain.com
  1. Manuals
  2. Brands
  3. Transition Networks
  4. CBFTF1017-105
  5. Leaflet

Transition Networks CBFTF1017-105 Leaflet

Download
Page of 1
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2010 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
AUTO NEG
AUTO CROSS LINK PASS THRU FAR END FAULT LINK RESTORE
AUTO
UPGRADE
REMOTE FIRMWARE
Specifications
Standards
IEEE Std. 802.3
Data Rate
10Mbps; 100Mbps
Filtering Addresses
1K MAC addresses
Filtering & Forwarding 
14,880pps for Ethernet; 
Rate
148,800pps for Fast Ethernet
RAM Buffers
512 KB
Max Packet Size
2048 bytes untagged
2044 tagged
Switches
SW1 (TP): Auto-Negotiation On/Off
SW2 (TP): 10Mbps or 100Mbps 
SW3 (TP): Half or Full-duplex 
SW4 (Fiber): Half or Full-duplex
SW5: Far-End-Fault On/Off
SW6: Link Pass Through On/Off
Status LEDs
PWR (Power)
FDPX (Fiber Duplex)
FLNK (Fiber Link/Activity)
TSPD (Copper Speed)
TDPX (Copper Duplex)
TLNK (Copper Link/Activity)
Dimensions
Width: 0.86” [22 mm]
Depth: 5.0” [127 mm]
Height: 3.4" [86 mm]
Power Consumption
4.0 Watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
FCC Class A, VCCI Class 1, CISPR22/EN55022 
Class A, EN55024, EN61000, CE Mark
Warranty
Lifetime
Ordering Info [Class B]
CBFTF1011-105
10/100BASE-TX (RJ-45) 
[100 m / 328 ft.]
to 100BASE-FX 1300 nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
CBFTF1013-105
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1300 nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
CBFTF1039-105
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1300 nm MM (LC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
CBFTF1014-105
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310 nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
CBFTF1019-105
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310 nm SM (LC)
[20 km/12.4 mi.] Link Budget: 17.3 dB
CBFTF1015-105
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310 nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
CBFTF1016-105
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310 nm SM (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
CBFTF1017-105
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1550 nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
CBFTF1035-105
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1550 nm SM (SC)
[120 km/74.6 mi.] Link Budget: 36.0 dB
CBFTF1040-105
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-X SFP Slot (empty)
Single Fiber Products 
Recommended use in pairs
CBFTF1029-105
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310 nm TX/1550 nm RX 
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CBFTF1029-106
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1550 nm TX / 1310 nm RX 
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CBFTF1029-107
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310 nm TX / 1550 nm RX 
single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CBFTF1029-108
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1550 nm TX / 1310 nm RX 
single fiber SM (SC)
[40k  /24.9 mi.] Link Budget: 25.0 dB
  CBFTF10xx-10x
point system™ slide-in-module media converter

Extend network distance up to 120 km

Bridging media converters will provide conversion 
and integration solutions for half and full-duplex 
environments.

Convert 10/100 on copper to straight 100 on fiber

Half or Full-Duplex on both ports
see also: 
10/100 Bridging 
Stand-Alone Media Converters 
10/100 Bridging Media Converter
Features

Fully manageable

LED indications for all operation modes

Auto-Negotiation

AutoCross™

Link Pass Through

Far-End-Fault (FEF)

Automatic Link Restoration

Remote Firmware Upgrade

Can be used with any Point System™ 
Chassis
Read Management Features

Media Converter Power

Copper & Fiber Link Status

Copper Port Speed

Hardware Switch Settings
Write Management Features

Enable/disable Auto-negotiation on Copper

Force 10Mbps or 100Mbps on Copper

Force Full or Half-duplex on Copper or Fiber

Select Advertised Modes 
(when Auto-Negotiation is Enabled)

Enable/disable:
• Pause
• Monitor Port (advanced filters available)
• Link Pass Through
• Far-End-Fault
10/100 Bridging 
10/100BASE-TX to 100BASE-FX