Huawei SFP+, 10m 02310EWK Leaflet
Product codes
02310EWK
Part
Number
Number
Model
Configuration
Remarks
02318169
LE0M0XSM88
This item is optional and is
used on the SFP+ interface
board. The quantity is
determined based on project
requirements.
used on the SFP+ interface
board. The quantity is
determined based on project
requirements.
0.3 km multimode 10GE
SFP+ module
SFP+ module
02318170
LE0M0XS1DD
10 km multimode 10GE
SFP+ module
SFP+ module
02310CNF
LE0M0XS4FF
40 km multimode 10GE
SFP+ module
SFP+ module
3.
Select special accessories based on user requirements.
1) Select stacking cables. On each S6700, a maximum of eight 10GE ports can form a stack port.
The stack port can connect to up to four ports on another S6700, and each port provides 10 Gbit/s
bandwidth. A maximum of nine S6700s can form a stack. Four S6700s provide three stacking
modules. You can select stacking cables of 1 m (02310EWH), 3 m (02310EWJ), or 10 m
(02310EWK). Stacking modules must be used in pairs.
bandwidth. A maximum of nine S6700s can form a stack. Four S6700s provide three stacking
modules. You can select stacking cables of 1 m (02310EWH), 3 m (02310EWJ), or 10 m
(02310EWK). Stacking modules must be used in pairs.
2) You are advised to configure lightning protectors (part number 19020034) in areas where
thunderstorm often occurs. The lightning protector has five slots and can connect to up to five
devices. The surge protection capability provided by the S6700 is as follows:
devices. The surge protection capability provided by the S6700 is as follows:
AC power port
Differential mode: ±2 kV
Common mode: ±4 kV
3) Configure USB disks. The S6700 provides USB interfaces and the storage USB disk (4 GB-USB
2.0, part number 06010171, and model NUSBDSK01).
4.
Select auxiliary materials.
Fibers: To configure fibers for a non-BIDI optical module, configure each optical interface with a Tx
optical fiber and an Rx optical fiber of the same type. To configure fibers for a BIDI optical module,
configure only one optical fiber. A single-mode optical fiber must be used when the single-mode optical
module is configured. Similarly, a multimode optical fiber must be used when the multimode optical
module is configured. You can select fibers of different lengths. Huawei provides fibers of 5 m, 10 m, 15 m,
and 20 m and can provide fibers of a maximum of 50 m.
optical fiber and an Rx optical fiber of the same type. To configure fibers for a BIDI optical module,
configure only one optical fiber. A single-mode optical fiber must be used when the single-mode optical
module is configured. Similarly, a multimode optical fiber must be used when the multimode optical
module is configured. You can select fibers of different lengths. Huawei provides fibers of 5 m, 10 m, 15 m,
and 20 m and can provide fibers of a maximum of 50 m.
Network cables: Each network cable is configured with two RJ45 connectors (part number 14080082). The
length of network cables is determined based on user requirements. The price grows for every 1 m increase
in length. The network cable (part number 25050014) is sold with the connectors (part number 14080082).
length of network cables is determined based on user requirements. The price grows for every 1 m increase
in length. The network cable (part number 25050014) is sold with the connectors (part number 14080082).