Manualsbrain.com
  1. Manuals
  2. Brands
  3. Transition Networks
  4. J/E-PSW-FX-03(100)
  5. Leaflet

Transition Networks J/E-PSW-FX-03(100) Leaflet

Download
Page of 1
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2010 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
Ordering Info
J/E-PSW-FX-03
10/100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1300 nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
J/E-PSW-FX-03(SC)
10/100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1300 nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
J/E-PSW-FX-03(SM)
10/100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1310 nm SM (SC) 
[20 km/12.4 mi.] Link Budget: 16.0 dB
Single Fiber Products 
Recommended use in pairs
J/E-PSW-FX-03(100)
10/100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1310 nm TX / 1550 nm RX 
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
J/E-PSW-FX-03(101)
10/100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1550 nm TX / 1310 nm RX 
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-CC
Piggy Back Power Supply
SPS-1872-SA
Stand-Alone Power Supply
Mounting Options:
E-MCR-05
12-slot Media Converter Rack
RMS19-SA4-01
4-slot Media Converter Shelf
WMBD
DIN Rail Bracket 5.0" [127 mm]
WMBD-FS
DIN Rail Bracket (flat, small) 3.1" [79 mm]
WMBS
Wall Mount Bracket 3.2" [81 mm]
Specifications
Standards
IEEE Std. 802.3, IEEE Std. 802.3ab
Max. Packet Size
1522 bytes untagged 
1518 bytes tagged (802.3ac)                                 
Switches
SW1: Auto-Negotiation (UP = enable)
SW2: Full/Half Duplex (Copper) (UP = full-duplex)
SW3: Force Speed (Copper) (UP = 100 Mbps)
SW4: Full/Half Duplex (Fiber) 
(UP = full-duplex)
Dimensions
Width: 3.0" [76 mm]
Depth: 3.9" [100 mm]
Height: 1.0" [25 mm]
Status LEDs
PWR (Power): Lit for normal operation
LNK Act (fiber): Steady = Link; 
Flashing = RX Data
FD (fiber duplex): ON = Full duplex
LNK Act (copper): Steady = Link; 
Flashing = RX Data
FD (copper duplex): ON = Full duplex
100 (copper speed): ON = 100Mbps
Power
External AC/DC required; +12VDC, 0.5 A min
Power Consumption
2.5 Watts
Environment
0 – 50° C operating; 5% – 95% 
humidity non-condensing; 0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed, C-UL Listed (Canada)
Regulatory Compliance
FCC Class A, CISPR22/EN55022 
Class A, EN55024, CE Mark
Warranty
Lifetime
The "Just Convert-It™" Bridging Media
Converter is an inexpensive, no frills way to
extend the distance between connections
with different speeds or duplex using fiber
optic cable, while maintaining the same
quality and reliability found on Transition's
full-featured line of products.
J/E-PSW-FX-03(xx)
stand-alone media converter
10/100 Bridging Just Convert-IT
™
10/100BASE-TX to 100BASE-FX
10/100 Bridging
10/100 Bridging Media Converter
Features

Unit &  Port LEDs allow for quick 
status information

Auto-Negotiation

AutoCross™

Far-End-Fault (FEF) Detection

Ability to force 10Mbps or 100Mbps (TP port) 
and full or half-duplex on both copper and fiber

Automatic Link Restoration

Connect Legacy Networking Equipment:
Connect an existing 10Mbps device 
to 100Mbps devices.

Eliminate Collision Domains:
Connect two half-duplex hubs with a full-duplex    
connection over fiber containing no collisions
10/100 Bridging
AUTO CROSS
AUTO NEG
LINK RESTORE
AUTO
FAR END FAULT