Transition Networks SISTM1040-262D-LRT Leaflet
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2009 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
Specifications
Standards
IEEE 802.3, IEEE 802.3ab, IEEE 802.3u,
IEEE 802.3z, IEEE 802.3x
IEEE 802.3z, IEEE 802.3x
Data Rate
Copper (ports 1-16): 10/100Mbps
Copper (ports 17-18): 10/100/1000Mbps
SFP: 100/1000Mbps
Copper (ports 17-18): 10/100/1000Mbps
SFP: 100/1000Mbps
Filtering Addresses
8K MAC Addresses
Data Memory Buffer
1Mb
Backplane
7.2Gbps
Status LEDs
PWR 1 (Power): ON = primary power connected
PWR 2 (Power): ON = backup power connected
FAULT: ON = power input failure on PWR1 or PWR2
LNK/ACT: ON = Link; FLASHING = data transmitting
FDX/COL: ON = Full duplex mode;
FLASHING = collisions occuring
PWR 2 (Power): ON = backup power connected
FAULT: ON = power input failure on PWR1 or PWR2
LNK/ACT: ON = Link; FLASHING = data transmitting
FDX/COL: ON = Full duplex mode;
FLASHING = collisions occuring
Dimensions
Width: 2.8" [72 mm]
Depth: 4.1" [105 mm]
Height: 6.0" [152 mm]
Depth: 4.1" [105 mm]
Height: 6.0" [152 mm]
Ingress Protection
IP 30
Input Power
12 to 48 VDC;
redundant inputs with reverse polarity protection
redundant inputs with reverse polarity protection
Power Consumption
9 Watts
Environment
-40 to +75°C extended operating temperature;
5% – 95% humidity non-condensing;
0 – 10,000 ft. altitude
-40 to +85°C storage temperature
5% – 95% humidity non-condensing;
0 – 10,000 ft. altitude
-40 to +85°C storage temperature
Shipping Weight
3 lbs. [1.36 kg]
Safety
UL, cUL, CE/EN60950-1,
UL Class 1 Div 2 for hazardous environment
UL Class 1 Div 2 for hazardous environment
EMI Compliance
CISPR22/EN55022; EN60950 Class A; FCC Class A; CE
Mark; CE EN61000-4-2; CE EN61000-4-3; CE EN-
61000-4-4; CE EN61000-4-5; CE EN61000-4-6; CE
EN61000-4-8; CE EN61000-4-11; CE EN61000-4-12;
CE EN61000-6-2; CE EN61000-6-4
Mark; CE EN61000-4-2; CE EN61000-4-3; CE EN-
61000-4-4; CE EN61000-4-5; CE EN61000-4-6; CE
EN61000-4-8; CE EN61000-4-11; CE EN61000-4-12;
CE EN61000-6-2; CE EN61000-6-4
Environmental
IEC60068-2-32 (Free fall); IEC60068-2-27 (Shock);
IEC60068-2-6 (Vibration)
IEC60068-2-6 (Vibration)
Warranty
Lifetime
Transition Networks’ managed
Industrial Switches are hardened
devices designed to reliably op-
erate in harsh environments
such as those found on factory
floors, outdoor enclosures or
other hazardous environments.
Industrial Switches are hardened
devices designed to reliably op-
erate in harsh environments
such as those found on factory
floors, outdoor enclosures or
other hazardous environments.
Ordering Info
Extended Operating Temperature:
-40°C to +75°C
-40°C to +75°C
SISTM1040-262D-LRT
(16) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
with (2) 10/100/1000BASE-T (RJ-45)
or 100/1000BASE-X SFP Combo ports
Optional Accessories
(sold separately)
(sold separately)
SFP Modules (see pages 163-169)
External AC/DC Power Supply:
SPS-UA12DHT
100-240 VAC input
(-25° C to + 70° C operating temperature)
(-25° C to + 70° C operating temperature)
SISTM1040-262D-LRT
industrial switch
AUTO NEG
AUTO CROSS
Class 1 Div 2 Industrial Switch
10/100BASE-TX Managed
Industrial
Features
Auto-Negotiation
AutoCross™
Full Wire Speed Performance
with 7Gbps Backplane
Combo SFP ports support
100Base-FX and 1000Base-X SFPs
10/100/1000Base-T Combo RJ-45
Extended (-40°C to 75°C)
Operating Temperature
Dry Contact Relay Alarm Output
Dual, Redundant, Auto-Sensing
12-48VDC Power Inputs
Reverse Polarity Power Input
and Overload Current Protection
DIN Rail Mounting and Wall
Mount Brackets Included
Class 1 Div 2
Utilize Ethernet Connectivity in Industrial Automation
(16) 10/100Base-TX ports + (2) 10/100/1000Base-T
or 100/1000Base-X SFP Combo Ports
or 100/1000Base-X SFP Combo Ports
Management Features
VLAN
Port Based VLAN
802.1 Q Tag VLAN
Port Trunk with LACP
QoS (Quality of Service)
IEEE 802.1p Class of Service,
Per port provides
4 priority queues
4 priority queues
Port Based, Tag Based and Type
of Service Priority
Port Mirror
Monitor traffic in switched
networks
Security
Port Sercurity : MAC address
entries/filter
IP Security : IP address security
management to prevent
unauthorized intruder
unauthorized intruder
Login Security :
IEEE802.1X/RADIUS
IGMP Query mode for
Multi Media Application
IGMP Query mode for
Multi Media Application
Support multicast filter X-Ring
Support X-ring, Dual Homing,
Couple Ring and Dual Ring
Topology. Provide redundant
backup feature and recovery
time below 20ms
time below 20ms
Management
SNMP v1 v2c, v3/Web/Telnet/CLI
DHCP Client/DHCP Server
TFTP Firmware Upgrade
TFTP Configuration
Backup/Restore