Transition Networks CPSVT2629-100 Leaflet
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2011 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
Specifications
Standards
ITU-T; ISO-2593
Data Rate
1.2 Kbps to 10 Mbps
Switches
Side panel, external
DCE speed switch,
sixteen positions:
Speeds can also be set on DCE
converters locally or remotely
via software.
Front Panel,
Speeds can also be set on DCE
converters locally or remotely
via software.
Front Panel,
Loop-back Selector
Switch: Right Position: Loop
Fiber Back & Loop Copper Back
Left Position: Normal Operation
Fiber Back & Loop Copper Back
Left Position: Normal Operation
Jumpers
Jumper (J4): Hardware/Software mode
Jumper (J6): RX Clock Polarity: Set to sample the receive data on
the
Jumper (J6): RX Clock Polarity: Set to sample the receive data on
the
rising or falling edge of the receive clock
Jumper (J7): TX Clock Polarity: Set to sample the transmit data on
the
the
rising or falling edge of the receive clock
Status LEDs
Smart Serial Link: Green - Link is up;
Green Flashing - In loop-back mode;
Fiber: Green - Link is up;
Green Flashing - In loop-back mode;
PWR (Power): Green - ON power applied to board
Green Flashing - In loop-back mode;
Fiber: Green - Link is up;
Green Flashing - In loop-back mode;
PWR (Power): Green - ON power applied to board
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
5.0 Watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022, EN55024, EN60950 Class A;
FCC Class A; CE Mark
FCC Class A; CE Mark
Warranty
Lifetime
Management Features
4
Report device status to chassis
management software
• Local Fiber Link status
• Local/Remote Hardware/
management software
• Local Fiber Link status
• Local/Remote Hardware/
Software mode
• Local/Remote Speed select
• Local/Remote Loopback [pg 18]
• Local/Remote Loopback [pg 18]
• Local/Remote Cable type
reporting, near end
• Local/Remote Clock polarity
setting
4
Write operation includes:
• Local or Remote Loopback
• Local or Remote Speed Select
• Local or Remote Speed Select
Extend Distance Between Routers
CPSVT26xx-10x
point system™ slide-in-module network interface device
Features
4
Connect High Speed Serial
signals on copper to fiber
4
Supports multiple protocols
through the use of a
universal 26-pin serial
interface connector
universal 26-pin serial
interface connector
4
Extend the point of presence
of a copper
V.35/X.21/RS449/RS530/RS232
connection at data rates up to
10 Mbps.
V.35/X.21/RS449/RS530/RS232
connection at data rates up to
10 Mbps.
4
Supports Remote Management
of a stand-alone NID
4
Copper & Fiber Loopback
4
LED indications for Fiber Link,
Loopback & Data [pg 18]
4
Ability to use a combination
of any copper interface
(RS449 to V.35, RS530 to
X.21, DTE-DTE, DTE-DCE,
DCE-DCE, etc.)
X.21, DTE-DTE, DTE-DCE,
DCE-DCE, etc.)
4
All interfaces converted at
the physical level
4
Synchronous or
asynchronous capability
4
Field Upgradeable Firmware
Ordering Information
CPSVT2611-100
26-pin
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
CPSVT2613-100
26-pin
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
CPSVT2614-100
26-pin
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Single Fiber Products
Recommended use in pairs [pg 19]
CPSVT2629-100
26-pin
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CPSVT2629-101
26-pin
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CPSVT2629-102
26-pin
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CPSVT2629-103
26-pin
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
Cable Assemblies
21DCE-3
DB-15 (FT) (26-pin) to (DCE)
[3 m/10 ft.]
21DTE-3
DB-15 (MT) (26-pin) to (DTE)
[3 m/10 ft.]
232DCE-3
DB-25 (FT) (26-pin) to (DCE)
[3 m/10 ft.]
232DTE-3
DB-25 (MT) (26-pin) to(DTE)
[3 m/10 ft.]
35DCE-3
V.35 (FT) (26-pin) to (DCE)
[3 m/10 ft.]
35DTE-3
V.35 (MT) (26-pin) to (DTE)
[3 m/10 ft.]
449DCE-3
DB-37 (FT) (26-pin) to (DCE)
[3 m/10 ft.]
449DTE-3
DB-37 (MT) (26-pin) to (DTE)
[3 m/10 ft.]
530DCE-3
DB-25 (FT) (26-pin) to (DCE)
[3 m/10 ft.]
530DTE-3
DB-25 (MT) (26-pin) to (DTE)
[3 m/10 ft.]
Copper Distances
Standard
Range*
RS232/V.24
15 m
RS449/V.36
1.2 km
V.35
600 m
X.21
1.2 km
RS530
1.2 km
*For reference only. Contact Transition Networks
for detailed range information.
for detailed range information.
High Speed Serial:
V.35/X.21/RS449/RS530/RS232
with Remote Management
Remotely Managed High Speed Serial NID
(Network Interface Device)
(Network Interface Device)
• 0 – TT = Receive CLK
• 1 – 56 Kbps
• 2 – 64 Kbps
• 3 – 112 Kbps
• 4 – 128 Kbps
• 5 – 256 Kbps
• 6 – 384 Kbps
• 7 – 512 Kbps
• 1 – 56 Kbps
• 2 – 64 Kbps
• 3 – 112 Kbps
• 4 – 128 Kbps
• 5 – 256 Kbps
• 6 – 384 Kbps
• 7 – 512 Kbps
• 8 – 768 Kbps
• 9 – 1.024 Mbps
• A – 1.544 Mbps
• B – 2.048 Mbps
• C – 3.072 Mbps
• D – 4.096 Mbps
• E – 6.144 Mbps
• F – Asynchronous Mode
• 9 – 1.024 Mbps
• A – 1.544 Mbps
• B – 2.048 Mbps
• C – 3.072 Mbps
• D – 4.096 Mbps
• E – 6.144 Mbps
• F – Asynchronous Mode