Transition Networks SFEPE1013-100 SFEPE1013-100-NA Leaflet

Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA

tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com

©2010 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.

Specifications

Standards

IEEE Std. 802.3; IEEE Std. 802.3af

Switches

1&2: Set voltage output on twisted pair
3: IEEE 802.3af mode / Legacy mode
4: Voltage polarity
5: MDI power on signal pairs / spare pairs
6: Enable / disable Auto-negotiation
7: Enable / disable Pause
8: Enable / disable Link Pass Through
9: Enable / disable Far-End-Fault
10: Enable / disable AutoCross™

Status LEDs

PWR (power): Lit for normal operation
MDI Fault: ON = over-current detected
MDI ON: ON = MDI port supplying power
TX Link: ON = Link on copper port
TX Act: Flashing = data activity on copper link
FX Link: ON = Link on fiber port
FX Act: Flashing = data activity on fiber link

Dimensions

Width: 7.3" [185 mm]
Depth: 4.4" [112 mm]
Height: 1.2" [30 mm]

Power

Models SFEPE10xx-100:
90 – 250VAC Internal 
(Power Cord Supplied)
Models SFEPE10xx-110:
18 – 60VDC; 24 – 48VAC Internal 
(Power Cord Supplied)

Power Consumption

45W Max

Operating Temperature

0 – 50° C [32° – 122°F]

Storage Temperature

-25° – 85° C [-13° – 185°F]

Environment

5 – 95% humidity non-condensing;
altitude 0 – 10,000 ft.

Shipping Weight

2 lbs. [0.90 kg]

Regulatory Compliance

EN55022:1994+A1:1996+A2:1997 Class A; FCC Part
15 Subpart B; UL 1950

Warranty

Lifetime

Ordering Info

100BASE-TX (RJ-45) 

to 100BASE-FX 1300 nm multimode (ST)

100BASE-TX (RJ-45) 

to 100BASE-FX 1300 nm multimode (SC)

100BASE-TX (RJ-45) 

to 100BASE-FX 1310 nm SM (SC)

Optional Accessories
(sold separately)

WMBD-P (see page 69)

DIN Rail Mount Bracket POE

WMBL (see page 69)

Wall Mount Bracket 4.0” [102 mm]

stand-alone media converter

Transition's AC or DC powered PoE media con-
verters are Power Sourcing Equipment (PSE) and
are fully compatible with Powered Devices (PD)
that comply with the IEEE802.3af: 2003 standard.
The converters also include a PD signature sens-
ing and power monitoring features per the IEEE
802.3af standard.

SFEPE10xx-1xx products can operate in two
modes: IEEE 802.3af mode as well as “legacy
mode”. In the IEEE 802.3af mode the PoE is fully
compatible with devices that comply with the
IEEE802.3af standard. The PoE converter is also
capable of inserting power on either the spare
pairs or data pairs of the MDI.

In the “legacy mode” PoE can be configured for
reverse polarity, 12 VDC, 24 VDC, or 48 VDC
power insertion; as well as for other non-
IEEE802.3af compatible PDs.

Different voltages & modes are switch selectable.

Power over CAT5 to Remotely Located Devices

Features



Internal AC or DC power supply



IEEE802.3af Power-over-Ethernet 

Compatible Mode



Legacy Mode (Non IEEE802.3af)



12, 24, or 48 VDC PSE Output Voltage 

with Reverse Polarity Selection



Signal Pair and Spare Pair Power Insertion



Over-Current Protection



Under-Current Detection



Minimum Load Sensing



Fault Protection Input



Exceeds IEEE802.3af ripple requirements 

on PSE MDI power leads



Max 16.8 Watts Power output capacity at 

legacy 48 VDC



PSE MDI Power Enable/Disable



Auto-Negotiation



AutoCross™



Link Pass Through



Far-End-Fault (FEF)



Automatic Link Restoration



Pause

AUTO NEG

AUTO CROSS LINK PASS THRU FAR END FAULT LINK RESTORE

AUTO

PAUSE



Enables enterprises to provide 

power to network devices over 
the existing CAT5 data connection.



Combine data received over a 

fiber optic link with -48VDC 
power; providing power to Data 

Terminal Equipment (DTE); 

Power Devices (PD) over 
unshielded twisted pair cable