Power Acoustik P2-12W Leaflet
P2 Features
Taking performance to the next level, these new subs have some drastic improvements. Being redes-
igned from the ground up gives us the opportunity to tailor the final product to what you’ve been ask-
ing for. You asked for more power handling – you got it! You wanted more bottom-end low bass – you
got it! More importantly, these new subs are more durable and will last longer than previous models.
All of this is due to the Kapton formers with copper wound voice coils, butyl rubber surrounds, poly-
propylene cones, and above all, proper design.
igned from the ground up gives us the opportunity to tailor the final product to what you’ve been ask-
ing for. You asked for more power handling – you got it! You wanted more bottom-end low bass – you
got it! More importantly, these new subs are more durable and will last longer than previous models.
All of this is due to the Kapton formers with copper wound voice coils, butyl rubber surrounds, poly-
propylene cones, and above all, proper design.
WWW.POWERACOUSTIK.COM
Driver Specifications
All enclosures should be made of .75” (3/4”) material only. When
possible, make the baffle 1.5” (1 1/2”) thick and add .75” (3/4”)
to the depth of the enclosure to compensate. All volumes
INCLUDE vent/port and subwoofer displacements. DO NOT
change the volume unless you plan on adding a substantial amount
of bracing. For added performance, applying a coat of fiberglass
resin to the interior walls will greatly improve sealing the
enclosure. Adding a thin layer of poly-fill will improve response by
smoothing out reflections within the enclosure.
possible, make the baffle 1.5” (1 1/2”) thick and add .75” (3/4”)
to the depth of the enclosure to compensate. All volumes
INCLUDE vent/port and subwoofer displacements. DO NOT
change the volume unless you plan on adding a substantial amount
of bracing. For added performance, applying a coat of fiberglass
resin to the interior walls will greatly improve sealing the
enclosure. Adding a thin layer of poly-fill will improve response by
smoothing out reflections within the enclosure.
Enclosure Recommendations
Turn over for woofer wiring diagrams...
“T/S Spec
P2-10W P2-12W P2-15W
Fs (Hz)
33.50
24.83
22.19
Qms 5.625
5.176
5.939
Vas (ft
3
) 1.235
3.017
8.041
Xmax (mm)
8.10
10.10
10.50
Xmech (mm)
12.15 15.15 15.75
Qes 0.782
0.837
0.653
Re (Ω) 7.2
7.2
7.2
Voice Coil (Ω) DVC
4Ω DVC
4Ω DVC 4Ω
V.C. Diameter (in.)
2.00”
2.00”
2.50”
BL (Tm)
13.86 14.53 18.54
RMS Power
500
600
700
Max Power
1200
1400
1600
Qts 0.691
0.72
0.588
1w/1m SPL (dB)
84.10
83.80
87.68
Overall Diameter
10.50”
12.625” 15.75”
Overall Height
7.00”
7.50”
8.50”
Mounting Depth
6.50”
6.750”
7.75”
Cutout Diameter
9.25”
11.00”
14.00”
Flange Width
0.75”
0.875” 0.875”
Flange Height
0.625”
0.75”
0.75”
Weight (lbs.)
8.3
10.9
15.5
P2-10W Sealed P2-12W Sealed P2-15W
Sealed
Cubic
Feet
Tuning
(Hz)
Cubic
Feet
Tuning
(Hz)
Cubic
Feet
Tuning
(Hz)
0.75 43.2 1.25 34.7 2.00 37.7
P2-10W Ported
P2-12W Ported P2-15W
Ported
Cubic
Feet
Port
Diameter
FB/F3
(Hz)
Cubic
Feet
Port
Diameter
FB/F3
(Hz)
Cubic
Feet
Port
Diameter
FB/F3
(Hz)
1.50 3" x 9" 35/31 2.00 4" x 12.5" 35/31 4.00 (2) 4" x 11.75" 35/32
Polypropylene Injection Molded Cone
Butyl-Rubber Surround
KSV Kapton Voice Coil
Nickel Plated 8 ga. Compression Wire Terminal
Suspension Integrated Tinsel Leads
Poly Cotton Spider
Texture Coat Finish on Stamped Steel Basket