Transition Networks S6010-1029-B2 S6010-1029-B2-NA Leaflet

Product codes

S6010-1029-B2-NA

Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA

tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com

©2011 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.

Specifications

Standards

ANSI T1.102, T1.402 and T1.408, ITU I.431, G.703. G.736, G.775
and G.823, ETSI 300-166, 300-233 and TBR12/12

Copper Connectors

RJ-48, BNC

Fiber Connectors

SFP: LC connector Uses standard 100BASE-X/OC-3 SFP
Fixed Optics: ST or SC connector

Data Rates

T1 = 1.544 Mbit/s, E1 = 2.048 Mbit/s

Status LED

Power, Signal Detect Copper, Signal Detect Fiber

Dimensions

W: 3.25” [82 mm]; D: 6.5” [165 mm]; H: 1.0” [25 mm]

Power Consumption

2.6 Watts

Power

Input: 100-240 VAC
Output: 12 VDC

Operating Temp

-10°C to 65°C

Altitude

0-10,000 Feet

Operating Humidity

5-95% (non-condensing)

Shipping Weight

2.0 lbs. [0.90 kg]

Regulatory Compliance

CISPR/EN55022 Class A; FCC Class A; CE Mark, UL60950

MTBF w/Power Supply

Greater than 41,660 hours (MIL-HDBD-217F)
Greater than 114,580 hours (Bellcore)

MTBF w/o Power Supply

Greater than 250,000 hours (MIL-HDBD-217F)
Greater than 687,000 hours (Bellcore)

Warranty

Lifetime

T1/E1 to Fiber Network Interface Device

Features

Remote in-band management

Local or Remote Loopbacks -

Copper or Fiber

Switch selectable for T1 or E1

Remote firmware upgrade

LEDs for immediate visual status

Supports dual or single fiber

Supports multimode and single mode

fiber at a variety of distances

Supports CWDM SFPs

SNMP management when used with

ION chassis and management module

Remote standalone can be managed

by local peer

The T1/E1 copper to fiber network inter-
face device (NID) provides a solution for
those users that need to extend T1/E1
connections over fiber.

The T1/E1 supports Small Form Pluggable
(SFP) transceivers to support a variety of
fiber types, distances and wavelengths to
provide maximum flexibility across a va-
riety of network topologies. The use of
Coarse Wave Division Multiplexing
(CWDM) SFPs can be utilized to further in-
crease the bandwidth capacity of the fiber
infrastructure.

The T1/E1NID must be used in pairs. A
typical installation will include a chassis
card installed in the ION Platform locally
and a stand-alone device installed at the
remote location.

Application Diagram

S6010 Series

stand-alone device for the ion platform

T1/E1 to Fiber

The ION Platform

Ordering Information

S6010-1011

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1300nm multimode (ST)

[2 km/1.2 mi.] Link Budget: 11.0 dB

S6010-1013

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1300nm multimode (SC)

[2 km/1.2 mi.] Link Budget: 12.0 dB

S6010-1014

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1310nm single mode (SC)

[20 km/12.4 mi.] Link Budget: 16.0 dB

S6010-1015

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

1310nm single mode (SC)

[40 km/24.9 mi.] Link Budget: 29.0 dB

S6010-1016

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1310nm single mode (SC)

[60 km/37.3 mi.] Link Budget: 32.0 dB

S6010-1017

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1550nm single mode (SC)

[80 km/49.7 mi.] Link Budget: 29.0 dB

S6010-1040

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to SFP slot (empty)

S6010-3040

(2) Coax (BNC)

to SFP slot (empty)

Single Fiber Products

Recommended use in pairs

S6010-1029-A1

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1310nm TX /1550nm RX single fiber SM (SC)

[20 km/12.4 mi.] Link Budget: 19.0 dB

S6010-1029-A2

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1550nm TX /1310nm RX single fiber SM (SC)

[20 km/12.4 mi.] Link Budget: 19.0 dB

S6010-1029-B1

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1310nm TX /1550nm RX single fiber SM (SC)

[40 km/24.9 mi.] Link Budget: 25.0 dB

S6010-1029-B2

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1550nm TX /1310nm RX single fiber SM (SC)

[40 km/24.9 mi.] Link Budget: 25.0 dB