Transition Networks CAPTF3314-105 Leaflet

Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA

tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com

©2010 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.

Loop Extender/Isolator

Automatic Ring Down

Specifications

Standards

FCC Part 68, TBR21

Analog Port

Connector: RJ-11

(Telephone Emulation or FXS)

Impedance: 600 ohms
REN: 0.48
Loop Current: 20 to 60ma.
Insertion Loss: 0.0 +/-1.0 dB at 1000 Hz when both
ports are terminated at 600 ohms

Analog Port

Impedance: 600 ohms

(Central Office Emulation or FXO)

Battery Source: 48 VDC +/- 5V
Ringing Supply: 90Vp-p
Ring Frequency: 25 Hz.
(Reproduces frequency detected by side A)
Ring Cadence: Reproduces cadence detected by side A
Insertion Loss: 1.0 +/- 1.0 dB @ 1000 Hz
when both ports are terminated at 600 ohms

Voice Frequency

300 Hz – 3 KHz

Switches/Option Jumpers

Automatic Ring Down/Normal

Status LEDs

LED colors are Green
SDF (Fiber Link): On indicates fiber link up;
ACT (In Use): On indicates unit in use;
Flashing indicates ringing;
PWR (Power): On indicates power is on

Dimensions

105 Model:

Height: 3.4" [86 mm]
Depth: 5.0" [182 mm]
Width: 0.86" [22 mm]

115 Model:

Height: 3.4" [86 mm]
Depth: 5.0" [182 mm]
Width: 1.75" [43 mm]

Power Consumption

105 Model:

4 Watts

115 Model:

7 Watts

Environment

See chassis specifications

Shipping Weight

1 lb. [0.45 kg]

Emissions Compliance

FCC Class A; VCCI Class A; EN 55022 (CISPR 22)
Class A; ICES 003

Safety Compliance

CISPR A; CE Mark

Warranty

Lifetime

Ordering Information

Line Side FXS: CAPTF3311-105
Customer Side FXO: CAPTF3311-115

Twisted Pair (RJ-11)

[5 km/3.1 mi.]

to 1300nm multimode (ST)

[2 km/1.2 mi.] Link Budget: 11.0 dB

Line Side FXS: CAPTF3313-105
Customer Side FXO: CAPTF3313-115

Twisted Pair (RJ-11)

[5 km/3.1 mi.]

to 1300nm multimode (SC)

[2 km/1.2 mi.] Link Budget: 11.0 dB

Line Side FXS: CAPTF3314-105
Customer Side FXO: CAPTF3314-115

Twisted Pair (RJ-11)

[5 km/3.1 mi.]

to 1310nm single mode (SC)

[20 km/12.4 mi.] Link Budget: 16.0 dB

Line Side FXS: CAPTF3315-105
Customer Side FXO: CAPTF3315-115

Twisted Pair (RJ-11)

[5 km/3.1 mi.]

to 1310nm single mode (SC)

[40 km/24.9 mi.] Link Budget: 26.0 dB

Single Fiber Products

Recommended use in pairs

Line Side FXS: CAPTF3329-105*
Customer Side FXO: CAPTF3329-115*

Twisted Pair (RJ-11)

[5 km/3.1 mi.]

to 1310nm TX/1550nm RX single fiber

single mode (SC)

[20 km/12.4 mi.] Link Budget: 19.0 dB

Line Side FXS: CAPTF3329-106*
Customer Side FXO: CAPTF3329-116*

Twisted Pair (RJ-11)

[5 km/3.1 mi.]

to 1550nm TX/1310nm RX single fiber

single mode (SC)

[20 km/12.4 mi.] Link Budget: 19.0 dB

Line Side FXS: CAPTF3329-107*
Customer Side FXO: CAPTF3329-117*

Twisted Pair (RJ-11)

[5 km/3.1 mi.]

to 1310nm TX/1550nm RX single fiber

single mode (SC)

[40 km/24.9 mi.] Link Budget: 25.0 dB

Line Side FXS: CAPTF3329-108*
Customer Side FXO: CAPTF33129-118*

Twisted Pair (RJ-11)

[5 km/3.1 mi.]

to 1550nm TX/1310nm RX single fiber

single mode (SC)

[40 km/24.9 mi.] Link Budget: 25.0 dB

* Note: Single Fiber products should be paired
by application:

Loop Extender/Isolator Application
Line Side FXS: CAPTF3329-115
Customer Side FXO: CAPTF3329-116

Automatic Ring Down Application
Line Side FXS: CAPTF3329-107
Customer Side FXO: CAPTF3329-108

CAPTF33xx-1xx

point system™ slide-in-module network interface device

Connect central-office voice grade
signals to distant Plain Old Telephone
equipment

(POTS)

utilizing standard tele-

phone signaling. Two units are
required to implement an end to end
system. Unit A connects to a telephone
line or PBX and has the ability to detect
ringing voltages and to act as a
telephone

(LINE SIDE FXS).

Unit B is the

reciprocal unit and has the ability to act
as a Central Office and connects to a
telephone device

(CUSTOMER SIDE FXO).

POTS 2-Wire Copper to Fiber

POTS 2-Wire