Transition Networks SISTP1014-141-LRT Leaflet

Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA

tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com

©2010 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.

Specifications

Standards

IEEE 802.3, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x

Data Rate

Copper: 10/100Mbps 

Fiber: 100Mbps

Filtering Addresses 

1K MAC Addresses

Back Plane

1.0Gbps

Status LEDs

PWR 1 (Power): ON = primary power connected
PWR 2 (Power): ON = backup power connected
FAULT: ON = power input failure on PWR1 or PWR2
PWR FWD (ports 1-4): ON = PoE power output 
LNK/ACT (ports 1-5): ON = Link; 
FLASHING = data transmitting
FDX/COL (ports 1-4): ON = Full duplex mode; 
FLASHING = collisions occuring

Dimensions

Width: 1.2" [30 mm]
Depth: 3.7" [95 mm]
Height: 5.5" [140 mm]

Ingress Protection

IP30

Input Power

48 VDC; redundant inputs

Power Consumption

4.6 Watts (without PoE); 
66 Watts (Full load with PoE)

Environment Compliance

-40 to +65°C Ext. operating temp.
5%– 95% humidity non-condensing
0 – 10,000 ft. altitude
-40 to +85°C storage temp.

Shipping Weight

1.4 lbs. [0.64 kg]

Safety 

UL, cUL, CE/EN60950-1

EMI

CISPR22/EN55022; EN60950 Class A; FCC Class A; CE
Mark;CE EN61000-4-2; CE EN61000-4-3; CE EN-
61000-4-4; CE EN61000-4-5; CE EN61000-4-6; CE 
EN61000-4-8; CE EN61000-4-11; CE EN61000-4-12; 
CE EN61000-6-2; CE EN61000-6-4

Environmental 

IEC60068-2-32 (Free fall); IEC60068-2-27 (Shock); 
IEC60068-2-6 (Vibration)

Warranty

Lifetime

Ordering Info

(4) 10/100BASE-TX (RJ-45)

to 100BASE-FX 1300nm MM (ST)

(4) 10/100BASE-TX (RJ-45)

to 100BASE-FX 1300nm MM (SC)

(4) 10/100BASE-TX (RJ-45)

to  100BASE-FX 1310nm SM (SC)

Optional Accessories
(sold separately)

48 VDC Industrial Power Supply

Transition’s Industrial PoE switches
are Power Sourcing Equipment (PSE)
devices that comply with the
IEEE802.3af 2003 standard and com-
bine data received over a fiber optic
link with -48VDC power; providing
power to Powered Devices (PD) over
unshielded twisted pair cabling. These
Industrial PoE Switches are hardened
devices designed to reliably operate in
harsh environments such as those
found on factory floors, outdoor en-
closures or other hazardous environ-
ments while providing all the benefits
of PoE power.

industrial switch

AUTO NEG

AUTO CROSS

Features



Auto-Negotiation 



AutoCross™



Full Wire Speed Performance 

with 1Gbps Backplane



4-port integrated PoE injector 

with full 15.4 Watts per port on 
data pairs



IEEE 802.3af Power-over-Ethernet 

Compliant



Extended (-40°C to 65°C) 

operating temperature



Dry Contact Relay Alarm Output



Dual, Redundant 48V DC 

Power Inputs



Reverse Polarity Power 

Input Protection



Overload Current Protection



DIN Rail Mounting and Wall Mount 

Brackets Included



Barrel Connector

PoE to Remotely Located Devices 
in Harsh Environments