Manualsbrain.com
  1. Manuals
  2. Brands
  3. Transition Networks
  4. S4TEF1029-113
  5. Leaflet

Transition Networks S4TEF1029-113 S4TEF1029-113-NA Leaflet

Product codes
S4TEF1029-113-NA
Download
Page of 1
AUTO NEG
AUTO CROSS LINK PASS THRU
TRANSPARENT
RAAN AREEN
NS
NT
LINK RESTORE
AUTO
PAUSE
REMOTE MGMT
LOOP BACK
UPGRADE
REMOTE FIRMWARE
Specifications
Standards
IEEE Std. 802.3 2003; Telecordia TR-NWT-001089: FCC Part 68,
UL1459; ITU-T, ANSI, AT&T, ETSI; TBR 12; PD 7024: 1994 (NTR 4);
AMI/B8ZS/HDB3; G.703
Switches
Numerous switch settings for line coding, line buildout, loopback (per
port), AIS setting, data/mgmt 
RS-232 and RS-232 port speed and parity
Ethernet port settings
Auto-Negotiation, Force speed/duplex and enable Transparent Link
Pass Through
Dimensions
Width: 3.7" [94 mm]
Depth: 4.7" [119 mm]
Height: 1.8" [46 mm]
Power
External AC/DC provided; 12VDC, 1.25A; unregulated; standard; UL
listed
Power Consumption
6.0 watts
Operating Temperature
0 – 50°C
Storage Temperature
-40 to +85°C
Altitude
0 – 10,000 ft.
Operating Humidity
5% – 95% (non-condensing)
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply: 
UL listed, and CSA certified
Regulatory Compliance
FCC Class A, VCCI Class A, CISPR/EN55022 Class A, ICES-003, CE
Mark
Warranty
Lifetime
Ordering Info
Note: RS-232 cable included with each unit
(6-pin DIN to DB-9)
S4TEF1011-110
1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48 
[1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) 
[100 m]
plus 6-pin DIN 
[3 m / 10 ft.]
S4TEF1013-110
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48 
[1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) 
[100 m]
plus 6-pin DIN 
[3 m / 10 ft.]
S4TEF1014-110
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
to
(4) RJ-48 
[1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) 
[100 m]
plus 6-pin DIN 
[3 m / 10 ft.]
S4TEF1015-110
1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
to
(4) RJ-48 
[1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) 
[100 m]
plus 6-pin DIN 
[3 m / 10 ft.]
S4TEF1016-110
1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
to
(4) RJ-48 
[1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) 
[100 m]
plus 6-pin DIN 
[3 m / 10 ft.]
S4TEF1017-110
1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
to
(4) RJ-48 
[1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) 
[100 m]
plus 6-pin DIN 
[3 m / 10 ft.]
S4TEF1035-110
1550nm single mode (SC)
[120 km/74.6 mi.] Link Budget: 36.0 dB
to
(4) RJ-48 
[1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) 
[100 m]
plus 6-pin DIN 
[3 m / 10 ft.]
Single Fiber Products 
Recommended use in pairs
S4TEF1029-110
1310nm TX/1550nm RX single fiber SM
(SC)
[20 km/12.4 mi.] LB: 19.0 dB
to
(4) RJ-48 
[1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) 
[100 m]
plus 6-pin DIN 
[3 m / 10 ft.]
S4TEF1029-111
1550nm TX/1310nm RX single fiber SM
(SC) 
[20 km/12.4 mi.] LB: 19.0 dB
to
(4) RJ-48 
[1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) 
[100 m]
plus 6-pin DIN 
[3 m / 10 ft.]
S4TEF1029-112
1310nm TX/1550nm RX single fiber SM
(SC)
[40 km/24.9 mi.] LB: 25.0 dB
to
(4) RJ-48 
[1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) 
[100 m]
plus 6-pin DIN 
[3 m / 10 ft.]
S4TEF1029-113
1550nm TX/1310nm RX single fiber SM
(SC)
[40 km/24.9 mi.] LB: 25.0 dB
to
(4) RJ-48 
[1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) 
[100 m]
plus 6-pin DIN 
[3 m / 10 ft.]
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-SA 
Stand-Alone Power Supply
Mounting Options:
WMBD 
DIN Rail Bracket 5.0" [127 mm]
WMBD-F 
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBL 
Wall Mount Bracket 4.0" [102 mm]
WMBV 
Vertical Wall Mount Bracket 5.0" [127 mm]

Low cost transport capability:
(4) T1/E1/J1; (1) Ethernet and (1) RS232 data channel line

Target applications include: FTTx, such as Fiber-to-the-Business, Fiber-to-the-Building, Fiber-
to-the-MDU and Fiber-to-the-Home.
These products offer a low cost transport capability for four T1/E1/J1, one Ethernet and one data
channel line (x4TEF10XX-11X). The offering will provide copper connections compatible with G.703,
AMI/B8ZS/HDB3, 10/100BASE-TX, as well as RS232 channel; while the optical connection will run
at 155Mbps. TDM traffic is not mapped to Ethernet. A hardware-based solution guarantees the
constant bit rate of TDM transport without requiring traffic management. The product provides
physical layer status monitoring, alarm classification and data classification functions for Telecom
providers to manage their fiber optic network and reduce operation and maintenance costs. Tar-
get applications of the device include: FTTx, such as Fiber-to-the-Business, Fiber-to-the-
Building, Fiber to-the-MDU and Fiber-to-the-Home.
Application
S4TEF10xx-11x
stand-alone network interface device
Features

Auto-Negotiation for 10/100BASE-TX 

AutoCross™ (auto MDI/MDI-X) 

Transparent Link Pass Through for 
Ethernet 

Automatic Link Restoration 

Pause (Flow Control) 

Remote Management 

Local and Remote Loopback 

Remote Fiber Loss Signaling

AIS/TAOS

LEDs for each data port

DIP switches for line code, line length, 
local loopback or remote loopback

T1/E1/J1 mode settings

Dry Relay Contacts on each TDM port

Local (AUX) Management Interface 
(RS232 connector)

Switch selection for Data or 
Management mode on RS232 interface

Access to complete status information 
on local and remote device

Access to local and 
remote configuration

Switch or SNMP selected Baud 
rate operation

Remote Firmware Upgrade 
4x T1/E1/J1 + 10/100 Ethernet Transport Mux
4x T1/E1/J1 + 10/100 
Ethernet to Fiber
Devices must be used in pairs. Typically in-
stallation will include a chassis card
(C4TEF) installed in the Point System™  lo-
cally and a stand-alone device installed at
the remote location.
©2010 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.