Manualsbrain.com
  1. Manuals
  2. Brands
  3. Transition Networks
  4. C4TEF1014-100
  5. Leaflet

Transition Networks C4TEF1014-100 Leaflet

Download
Page of 1
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2009 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
LINK RESTORE
AUTO
REMOTE MGMT
LOOP BACK
UPGRADE
REMOTE FIRMWARE

Low cost transport capability:
(4) T1/E1/J1 and (1) RS232 data channel line

Target applications of the device include: 
FTTx, such as Fiber-to-the-Business, 
Fiber-to-the-Building, Fiber-to-the-MDU and 
Fiber-to-the-Home; Cell Tower backhaul
Specifications
(see pages 211-222 for complete fiber optic connector specs)
Standards
AMI/B8ZS/HDB3; G.703
Telecordia TR-NWT-001089: FCC Part 68, UL1459; ITU-T, 
ANSI, AT&T, ETSI; TBR 12; PD 7024: 1994 (NTR 4)
Switches
Numerous switch settings for line coding, line buildout, 
loopback (per port), AIS setting, data/mgmt RS-232 and 
RS-232 port speed and parity
Jumper
Hardware: device mode is determined by DIP switch settings
Software: device mode is controlled by the most recently saved, 
on-board microprocessor settings
Dimensions
Width: 1.72" [44 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
6.0 Watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
FCC Class A; VCCI Class A; 
EN 55022 (CISPR 22) Class A; ICES-003
Warranty
Lifetime
Ordering Info
C4TEF1011-100
1300 nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48 
[1.5 km/ 0.9 mi.]
plus 6-pin DIN 
[3 m/ 10 ft.]
C4TEF1013-100
1300 nm multimode (SC)
[2k m/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48 
[1.5 km/ 0.9 mi.]
plus 6-pin DIN 
[3 m/ 10 ft.]
C4TEF1014-100
1310 nm single mode (SC)
[20 km/12.4 mi.] 
Link Budget: 16.0 dB
to
(4) RJ-48 
[1.5 km/ 0.9 mi.]
plus 6-pin DIN 
[3 m/ 10 ft.]
C4TEF1015-100
1310 nm single mode (SC)
[40 km/24.9 mi.] 
Link Budget: 26.0 dB
to
(4) RJ-48 
[1.5 km/ 0.9 mi.]
plus 6-pin DIN 
[3 m/ 10 ft.]
C4TEF1016-100
1310 nm single mode (SC)
[60 km/37.3 mi.] 
Link Budget: 29.0 dB
to
(4) RJ-48 
[1.5 km/ 0.9 mi.]
plus 6-pin DIN 
[3 m/ 10 ft.]
C4TEF1017-100
1550 nm single mode (SC)
[80 km/49.7 mi.] 
Link Budget: 29.0 dB
to
(4) RJ-48 
[1.5 km/ 0.9 mi.]
plus 6-pin DIN 
[3 m/ 10 ft.]
C4TEF1035-100
1550 nm single mode (SC)
[120 km/74.6 mi.] 
Link Budget: 36.0 dB
to
(4) RJ-48 
[1.5 km/ 0.9 mi.]
plus 6-pin DIN 
[3 m/ 10 ft.]
Single Fiber Products 
Recommended use in pairs (see page 18)
C4TEF1029-100
1310 nm TX/1550 nm RX single fiber 
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
to
(4) RJ-48 
[1.5 km/ 0.9 mi.]
plus 6-pin DIN 
[3 m/ 10 ft.]
C4TEF1029-101
1550 nm TX / 1310 nm RX single fiber 
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
to
(4) RJ-48 
[1.5 km/ 0.9 mi.]
plus 6-pin DIN 
[3 m/ 10 ft.]
C4TEF1029-102
1310 nm TX / 1550 nm RX single fiber 
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
to
(4) RJ-48 
[1.5 km/ 0.9 mi.]
plus 6-pin DIN 
[3 m/ 10 ft.]
C4TEF1029-103
1550 nm TX / 1310 nm RX single fiber 
single mode (SC)
[40 km/ 24.9 mi.] Link Budget: 25.0 dB
to
(4) RJ-48 
[1.5 km/ 0.9 mi.]
plus 6-pin DIN 
[3 m/ 10 ft.]
*Note: RS-232 cable included with each card
(6-pin DIN to DB-9)
Application
C4TEF10xx-10x
point system™ slide-in-module network interface device
Features

Automatic Link Restoration

Remote Management 

Local and Remote Loopback 

AIS/TAOS

LEDs for each data port

DIP switches for line code, line  
length, local loopback or remote 
loopback

T1/E1/J1 mode settings

Dry Relay Contacts on each TDM port

Mirror Port (SNMP selectable)

Local (AUX) Management Interface 
(RS232 connector)

Switch selection for Data or 
Management mode on RS232

Access to complete status 
information on local and 
remote device

Access to local and remote 
configuration

Switch or SNMP selected Baud 
rate operation

Remote Firmware Upgrade 
4x T1/E1/J1 Copper to Fiber Transport Mux
T1/E1
see also: 
4xT1 Transport Mux Stand-Alone NIDs
4x T1/E1/J1 Copper to Fiber Transport Mux
Management Features

Report local device status:
• Fiber Link Status
• Copper Link Status for each T1/E1
• Hardware switch settings: LBO, AIS 
on C/F, HW/SW, speed
• AIS detected Fiber & Copper
• Model Number
• Copper & Fiber Connectors

Local command operations include:
• Loopback Fiber & T1/E1 per channel
• AIS TX on fiber on loss of copper link 
& AIS TX on copper on loss of 
fiber link
• Serial connection speed and parity 
(Software Mode)
• T1/E1 Mirror Port Modes 
(Port Trapping)
• Boot-load firmware upgrades

Remote device status:
• Fiber Link status
• Copper Link Status for each T1/E1
• Hardware switch settings: LBO, AIS 
on C/F, HW/SW, speed
• AIS detected Fiber & Copper
• Model Number
• Copper & Fiber Connectors

Remote Commands:
• Loopback Fiber & T1/E1 per channel
• Serial connection speed and parity 
(Software Mode)
• AIS TX on fiber on loss of copper link 
& AIS TX on copper on loss of 
fiber link
*Note: C4TEF cards cannot be used with the 1-Slot Point System™ Chassis.
The product provides physical layer status monitoring and alarm classification functions for Telecom
operators to 
manage their fiber optic network and reduce OPEX and maintenance costs.
Copper connections are compatible with G.703 and AMI/B8ZS/HDB3; while the optical connection will
run at 155Mbps. A hardware-based solution guarantees the constant bit rate of TDM transport without
requiring traffic management. 
Devices must be used in pairs. Typical installation will include a chassis card installed in the Point Sys-
tem™ locally and a stand-alone device (S4TEF) installed at the remote location.
SINGLE 
FIBER