Supermicro CSE742T 550B CSE-742T-550 B User Manual

 

The special design of the SC742 chassis allows it to either be used as a tower or as a rackmount 

system.  There are several versions of the chassis, which differ primarily in the power supply and 

IDE/SCSI configuration.  Please refer to the following instructions when working on the SC742.  

 

I. Removing the Chassis Side Cover: 

You will need to remove the chassis side cover to: 

 

A. Remove or install drives into any of the 5 ¼” drive bays. 

 

B. Replace chassis fans. 

 

C. Access the motherboard. 

Procedure: 

1.  Remove the two screws from the back lip of the side cover (this is the left cover when 

looking from the front). 

2.  Push in the release tab on the cover and push the cover back to the rear of the chassis.  It 

should stop after moving about ½ inch.    

 

Release Tab 
Depress tab 
while pushing 
cover toward 
rear of chassis. 

 

 

 

3.  You can now lift the side cover up and off the chassis.