Transition Networks SPOEB1013-100 SPOEB1013-100-NA Leaflet

Ordering Information

  10/100BASE-TX (RJ-45) 

to  100BASE-FX 1300nm multimode (ST) 

  10/100BASE-TX (RJ-45) 

to  100BASE-FX 1300nm multimode (SC) 

  10/100BASE-TX (RJ-45) 

to  100BASE-FX 1310nm SM (SC)

  10/100BASE-TX (RJ-45) 

to  100BASE-FX 1310nm SM (SC)

  10/100BASE-TX (RJ-45) 

to  100BASE-FX 1310nm SM (SC)

  10/100BASE-TX (RJ-45) 

to  100BASE-FX 1550nm SM (SC)

  10/100BASE-TX (RJ-45) 

to  100BASE-FX 1550nm SM (SC) 

Recommended use in pairs 

  10/100BASE-TX (RJ-45) 

to  100BASE-FX 1310nm TX/1550nm RX   

single fiber single mode (SC)

  10/100BASE-TX (RJ-45) 

to  100BASE-FX 1550nm TX/1310nm RX   

single fiber single mode (SC)

 

Optional Accessories (sold separately)

WMBD or WMBL 

    Wall Mount Brackets

RMS19-SA4-01 

    4-Slot Media Converter Shelf

Specifications

Standards 

IEEE Std. 802.3, IEEE Std. 802.3af

Switches 

SW1: Auto-Negotiation On/Off 

SW2: Speed TP: Force 10 Mbps or 100 Mbps (SW1 off) 

SW3: Duplex TP: Force Half or Full Duplex (SW1 off) 

SW4: Duplex Fiber: Half or Full Duplex 

SW5: AutoCross™ On/Off 

SW6: PSE On/Off 

SW7: PSE/LPT on/off 

SW8: Unused

Max Packet Size 

1522 bytes untagged 

1518 bytes tagged

Dimensions 

Width: 3.25” [82 mm] 

Depth: 4.8” [120 mm] 

Height: 1.0” [25 mm]

Power 

90 – 250 VAC external power supply

Power Consumption 

20 Watts max.

Operating Temperature 

0 – 40°C [32° – 104°F]

Storage Temperature 

-25° to +85°C [-13° to +185°F]

Environment 

5% – 95% humidity non-condensing;  

 

0 – 10,000 ft. altitude

Shipping Weight 

2 lbs. [0.90 kg]

Compliance 

EN55022:1994+A1:1996+A2:1997 Class A;  

FCC Part 15 Subpart B; UL 1950

Warranty Lifetime

Power Over CAT5 to Remotely Located Devices

Features

4

External AC power supply

4

IEEE802.3af Power-Over-Ethernet  

    Compatible

4

48 VDC PSE Output Voltage

4

Signal Pair or Spare Pair Power Insertion

4

PD Detection Signature

4

Over-Current Protection & Under-Current    

    Detection

4

Powered Device Reset

4

Switch selectable features and port  

    settings

4

Minimum Load Sensing

4

Fault Protection Input 

4

Auto-Negotiation 

4

AutoCross™ [

4

Link Pass Through 

4

Far-End-Fault (FEF) 

4

Automatic Link Restoration 

Enables enterprises to provide power to network de-

vices over the existing CAT5 data connection.
Transition’s AC powered PoE media converters com-

bine data received over a fiber optic link with -48  VDC 

power; providing power to Data Terminal Equipment 

(DTE) Power Devices (PD) over unshielded twisted pair 

cable. The PoE converters are Power Sourcing Equip-

ment (PSE) and are fully compatible with Powered 

Devices (PD) that comply with the IEEE802.3af: 2003 

standard. The converters also include a PD signature 

sensing and power monitoring features per the IEEE 

802.3af standard. Other features include Over-Current 

Protection, Under-Current Detection and Fault Protec-

tion Input.
This feature enhanced model offers the ability to en-

able/disable many of the features as well as force port 

capabilities (see switch section under specifications to 

the right).
In addition, with the PSE/LPT switch enabled, a loss of 

Fiber RX will disable PSE power output on the UTP port 

for 2 seconds to allow remote device to re-initialize.  

(Also known as Powered Device Reset.)
The PoE converter is fully compatible with devices that 

comply with the IEEE802.3af standard. The PoE con-

verter is capable of inserting power on data pairs or 

spare pair of the MDI.