Transition Networks E-FRL-MC05(L) Leaflet
Transition Networks, Inc.
6475 City West Parkway
Minneapolis, MN 55344 USA
6475 City West Parkway
Minneapolis, MN 55344 USA
tel 952.941.7600 or 800.526.9267
fax 952.941.2322
info@transition.com
http://www.transition.com
fax 952.941.2322
info@transition.com
http://www.transition.com
©2005 Transition Networks, Inc.
All trademarks are the property of their respective owners.
Technical information is subject to change without notice.
All trademarks are the property of their respective owners.
Technical information is subject to change without notice.
Connect AUI to Fiber
Ordering Info
Specifications
Product Number
Port One
Port Two
E-FRL-MC05
10BASE5
(AUI) (DB-15)
(AUI) (DB-15)
[50 m/164 ft.]
10BASE-FL
850nm
multimode (ST)
850nm
multimode (ST)
[2 km / 1.2
miles]
miles]
E-FRL-MC05(SC)
10BASE5
(AUI) (DB-15)
(AUI) (DB-15)
[50 m/164 ft.]
10BASE-FL
850nm
multimode (SC)
850nm
multimode (SC)
[2 km / 1.2
miles]
miles]
E-FRL-MC05(L)
10BASE5
(AUI) (DB-15)
(AUI) (DB-15)
[50 m/164 ft.]
10BASE-FL
1300nm
multimode (S
1300nm
multimode (S
T)
[5 km / 3.1
miles]
miles]
E-FRL-MC05(SM)
10BASE5
(AUI) (DB-15)
(AUI) (DB-15)
[50 m/164 ft.]
10BASE-FL
1310nm single
mode (ST)
1310nm single
mode (ST)
[20 km / 12.4
miles]
miles]
Standards
IEEE 802.3
Fiber Optic Connector Specs
E-FRL-MC05 &
E-FRL-MC05(SC)
E-FRL-MC05(SC)
Min TX PWR: -19.0 dBm
Max TX PWR: -10.0 dBm
RX Sensitivity: -29.5 dBm
Max In PWR: -7.2 dBm
Link Budget: 10.5 dB
Max TX PWR: -10.0 dBm
RX Sensitivity: -29.5 dBm
Max In PWR: -7.2 dBm
Link Budget: 10.5 dB
E-FRL-MC05(L)
Min TX PWR: -19.0 dBm
Max TX PWR: -14.0 dBm
RX Sensitivity: -29.5 dBm
Max In PWR: -14.0 dBm
Link Budget: 10.5 dB
Max TX PWR: -14.0 dBm
RX Sensitivity: -29.5 dBm
Max In PWR: -14.0 dBm
Link Budget: 10.5 dB
E-FRL-MC05(SM)
Min TX PWR: -29.0 dBm
Max TX PWR: -10.0 dBm
RX Sensitivity: -34.0 dBm
Max In PWR: -14.0 dBm
Link Budget: 5.0 dB
Max TX PWR: -10.0 dBm
RX Sensitivity: -34.0 dBm
Max In PWR: -14.0 dBm
Link Budget: 5.0 dB
Status LEDs
Status:
Steady on indicates normal
operation; Blinking once indicates
link down; Blinking twice indicates
AUI packets are too long (local
jabber); Not lit indicates no
connection to external power.
link down; Blinking twice indicates
AUI packets are too long (local
jabber); Not lit indicates no
connection to external power.
Collision:
Flashing or lit LED
indicates collisions are occurring
Receive:
Flashing or lit LED
indicates packets are being
received
received
Transmit:
Flashing or lit LED
indicates a packet has been
transmitted
transmitted
Switches
Position 1:
On/Off selectable SQE
testing for NICs and hubs that
support SQE
support SQE
Position 2:
Link Pass Through
On/Off control
Position 3:
Half-/Full-duplex mode
control
Dimensions
Width: 1.65” [42 mm]
Depth: 3.8” [95 mm]
Height: 0.94” [24 mm]
Depth: 3.8” [95 mm]
Height: 0.94” [24 mm]
Power
No external power required
Environment
0° – 40°C; 10% – 90% humidity
non-condensing; 0 – 10,000 ft.
altitude
non-condensing; 0 – 10,000 ft.
altitude
Shipping Weight
1 lb. [0.45 kg]
Compliance
FCC & CISPR Class A; CE Mark
Warranty
Lifetime
10BASE-FL Full/Half-Duplex Transceiver
The Full/Half-Duplex 10BASE-FL
Transceiver provides low cost network
migration options. Extend connection
distances between hubs and workstations
by incorporating fiber optic technology
into your network.
Transceiver provides low cost network
migration options. Extend connection
distances between hubs and workstations
by incorporating fiber optic technology
into your network.
Features
Both multimode and single mode
transceivers connect AUI male (DB-15)
nodes to a fiber optic medium via a
standard ST type connector in both full
and half-duplex modes. The ability to
operate in full-duplex mode allows for
operation between switches, routers and
servers using full-duplex Ethernet.
transceivers connect AUI male (DB-15)
nodes to a fiber optic medium via a
standard ST type connector in both full
and half-duplex modes. The ability to
operate in full-duplex mode allows for
operation between switches, routers and
servers using full-duplex Ethernet.
Ethernet AUI to Fiber
E-FRL-MC05(xx)
Transceivers
Link Pass Through