Panasonic PT-LX26H PT-LX26HE Leaflet

Replacement lamp unit
ET-LAL100

Replacement filter unit
ET-RFL100

Ceiling mount
bracket for
high ceilings*⁷
ET-PKV100H

Ceiling mount bracket
for low ceilings*⁷
ET-PKV100S

Bracket assembly
ET-PKL100B

D-Sub/S-VIDEO 
conversion cable
ET-ADSV

Power supply

100-240 V AC, 50/60 Hz

Power consumption

297 W (0.47 W in Eco standby mode

*1

, 8.6 W in Network standby mode.)

297 W (0.47 W in Eco standby mode

*1

, 

8.6 W in Serial standby mode.)

287 W (0.47 W in Eco standby mode

*1

,

7.1 W in Serial standby mode.)

LCD panel

Panel size

15 mm (0.59 inches) diagonal

(16:10 aspect ratio)

16 mm (0.63 inches) diagonal

(4:3 aspect ratio)

14 mm (0.55 inches) diagonal (4:3 aspect ratio)

Display method

Transparent LCD panel (x 3, R/G/B)

Pixels

1,024,000 (1,280 × 800) x 3,

total of 3,072,000 pixels

786,432 (1,024 × 768) x 3, total of 2,359,296 pixels

Lens

1.2x manual zoom, manual focus, F 2.10–2.25, f 19.11-22.94 mm

Lamp

230 W × 1, lamp replacement cycle (lamp power: High, Normal/Eco): 3,000 hours/4,000 hours

*2

Screen size (diagonal)

0.76–7.62 m (30–300 inch)

Brightness*³

2,500 lm (lamp power: High)

3,000 lm (lamp power: High)

2,600 lm (lamp power: High)

2,200 lm (lamp power: High)

Center-to-corner uniformity*³

85%

Contrast*³

3,000:1

(full on/full off, lamp power: High, Iris: on)

2,500:1

(full on/full off, lamp power: High, Iris: on)

500:1

(full on/full off, lamp power: High)

Resolution

1,280 × 800 pixels

*4

1,024 × 768 pixels

*5

Scanning
frequency

RGB (analog)

f

H

: 15–100 kHz, f

V

: 50–100 Hz, dot clock: 140 MHz or lower (Signals exceeding the dot clock rate of 140 MHz are downsampled.)   

YP

B

P

R

 (YC

B

C

R

)

f

H

: 15.75 kHz, f

V

: 60 Hz [480i(525i)] 

f

H

: 15.63 kHz, f

V

: 50 Hz [576i(625i)] 

f

H

: 31.50 kHz, f

V

: 60 Hz [480p(525p)] 

f

H

: 31.25 kHz, f

V

: 50 Hz [576p(625p)]

f

H

: 45.00 kHz, f

V

: 60 Hz [720(750)/60p] 

f

H

: 37.50 kHz, f

V

: 50 Hz [720(750)/50p] 

f

H

: 33.75 kHz, f

V

: 60 Hz [1080(1125)/60i] 

f

H

: 28.13 kHz, f

V

: 50 Hz [1080(1125)/50i]

VIDEO/S-VIDEO

f

H

: 15.75 kHz, f

V

: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], f

H

: 15.63 kHz, f

V

: 50 Hz [PAL/PAL-N/SECAM]

Optical axis shift

13:1

6:1

Keystone correction range

Vertical: ±30° (±20° when Auto Keystone)

Installation

Ceiling/floor, front/rear

Terminals

COMPUTER IN 1/
S-VIDEO IN

D-sub HD 15-pin (female) x 1 (RGB/YP

B

P

R

/YC

B

C

R

/S-VIDEO x 1)

(The D-Sub/S-VIDEO conversion cable ET-ADSV is required for inputting S-VIDEO signals.)

COMPUTER IN 2/
MONITOR OUT

D-sub HD 15-pin (female) x 1 (RGB×1),  (input/output selectable using on-screen menu)

(When Monitor Out is selected, the COMPUTER IN 1 signal is output.)

—

VIDEO IN

RCA pin × 1 (Composite VIDEO)

AUDIO IN

RCA pin x 2 (L-R x 1) for VIDEO input

—

COMPUTER
AUDIO IN

M3 × 1 (L-R x 1)

—

SERIAL IN

D-sub 9-pin (male) × 1 for external control (RS-232C compliant)

LAN

RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class 1))

—

Built-in speaker

3.2 cm round shape × 1, output power: 1 W (monaural)

—

Noise level

37.0 dB (lamp power: High), 34.1 dB (lamp power: Normal), 29.0 dB (lamp power: Eco)

Cabinet materials

Molded plastic

Dimensions (W × H × D)

349 x 105 x 247 mm (13.7” x 4.1” x 9.7”) (with legs at shortest position, not including protruding parts)

Weight

Approximately 2.99 kg (6.59 lbs)

Approximately 2.90 kg (6.39 lbs)

Operating environment

Operating temperature: 5°C–35°C (41°F–95°F), operating humidity: 20%-80% (no condensation)

Supplied accessories

Power cord x 1

*6

, wireless remote control unit, batteries (AAA/R03/LR03 type × 2), VGA cable x 1, filter cover

Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software)

Software CD-ROM (Logo Transfer Software)

PT-LW25H
(16:10 aspect ratio; throw ratio: 1.5–1.8:1)

PT-LX30H
(4:3 aspect ratio; throw ratio: 1.5–1.8:1)

PT-LX26H/LX26/LX22
(4:3 aspect ratio; throw ratio: 1.7–2.0:1)

unit: meters (feet)

unit: mm (inch)

*1 When Standby mode is set to Eco, network functions such as standby on via LAN are not available. Also, only certain commands can be received for external control using the serial terminal. *2 The values given for the recommended lamp replacement cycles 
are maximum. The usage environment affects the lamp replacement cycle. *3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *4 Input signals that exceed this resolution will be converted to 1,280 x  
800 pixels.  *5 Input signals that exceed this resolution will be converted to 1,024 x 768 pixels. *6 Power cords available (x 2) for the PT-LW25HEA/LX30HEA/LX26HEA/LX26EA/LX22EA.

Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fi re, malfunction or electric shock.

*7 This product is used together with an optional bracket assembly (sold separately).

*8 There is no guarantee of the lens performance when the projection distance exceeds 11.0 m (36.1 feet).

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. 
Product availability differs depending on region and country. This product may be subject to export control regulations. 
The projection distances and throw ratios given in this brochure are for use only as guidelines. For more detailed information, 
please consult the dealer from whom you are purchasing the product. The PJLink trademark is an application trademark in Japan, 
the United States, and other countries and regions or registered trademarks. All other trademarks are the property of
their respective trademark owners.
© 2011 Panasonic Corporation. All rights reserved.

PT-LW25HG1 Printed in Japan.

All information included here is valid as of November 2011.

1  The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping
  sound, or fail to illuminate, due to impact or extended use.
2  The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
  • Never place objects on top of the projector while it is in operation.  
  • Make sure there is an unobstructed space of 1,000 mm (39-3/8 in) or more around the projector’s exhaust openings. 
  • If stacking projector units, care must be taken to provide the recommended space between units. These space
    requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as
    a backup.  

  • If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the
    operating temperature listed in the specifi cations table during use. Also, make sure the projector’s intake and exhaust
    openings are not blocked.  Ensure there is suffi cient ventilation to prevent hot air from the exhaust openings being
    recirculated into the intake opening.
3  The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
  • The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
  • The brightness of the lamp will gradually decrease with use.
4  Due to natural characteristics of lamps, screen brightness may fl uctuate. This is not an indication of faulty lamp performance.