Transition Networks TN-XFP-ZR Leaflet

Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA

tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com

©2011 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.

Specifications 

Standards 

  IEEE802.3ae

Output Wavelength  

 

-5.5nm <  

λ

c

  <  +7.5nm

Dimensions  

 

Width: 0.71” [18 mm] 

   

Depth: 3.07” [78 mm] 

   

Height: 0.33” [8 mm]

Power 

  3.3V

Power Consumption 

 

0.66 Watts

Environment 

  

0°C – 70°C Operating 

 

  

 

-5°C - 70°C Operating 

 

  

 

-45°C - 80°C Operating

Operation Humidity 

 

10% to 90% (non-condensing)

Compliance   

 

IEC-60825; FDA 21; CFR 1040.10  

   and 

1040.11

Warranty 

  Lifetime

Ordering Information 

  10GBase-SR/SW/10G Fibre Channel, 

XFP w/Digital Diagnostics (DMI) 850nm (LC) 

  10GBase-LR/LW/10G Fibre Channel, XFP w/

Digital Diagnostics (DMI)1310nm (LC)

  10GBase-LR/LW/10G Fibre Channel, XFP w/

Digital Diagnostics (DMI)1310nm (LC)

  10GBase-LR/ER/10G Fibre Channel, XFP w/

Digital Diagnostics (DMI)1310nm (LC)

  10GBase-ZR/10G Fibre Channel, XFP  w/

Digital Diagnostics (DMI)1550nm (LC)

  10GBase-LR/10G Fibre Channel, XFP 

w/Digital Diagnostics (DMI)1550nm (LC)

  10GBase-LR/LW/10G Fibre Channel, XFP w/

Digital Diagnostics (DMI)1310nm (LC)

  10GBase-LR/LW/10G Fibre Channel, XFP w/

Digital Diagnostics (DMI) 1310nm (LC)

  XFP 10GBASE-LR/10G Fibre Channel  

single mode (LC)

  XFP 10GBASE-ER/10G Fibre Channel  

single mode (LC)

  XFP 10GBASE-ZR single mode (LC) 

Fiber Connections with XFPs

*Note: Per Cisco Systems’ literature, the Cisco switches with XFP slots do not accept 
modules other than Cisco’s own XFPs. The Cisco switch identifies the manufacturer 
ID along with the part number and blocks operations to this port for non-Cisco inter-
faces. Other major XFP switch manufacturers do not indicate in their literature that 
such restrictions are imposed.

*Transition Networks’ XFP units fully comply with Multi-Sourcing Agreement (MSA). 
This compliance allows Transition Networks’ XFP modules to be used on other MSA-
compliant XFP platforms without any problems.

* The TN-XFP-LR4-Cxx will only have 12 wavelengths, from 1270nm to 1330nm and 
from 1470nm to 1610nm, each step 20nm

** The TN-XFP-LR7-Cxx will only have 7 wavelengths, from 1470nm to 1610nm, 
each step 20nm

xfp modules

Additional Features

4

Compliant with IEEE 802.3ae  

    10GBASE-SR/SW

4

Compliant with 10G Fibre  

    Channel 1200-MX-SN-I

4

Low power Dissipation < 1.2W

 

4

Compliant with IEEE 802.3ae  

    10GBASE-LR/LW//ER/ZR

4

Compliant with 10G Fibre Channel  

    1200-SM-LL-L

4

Compliant with XFI 10G Serial  

    Electrical Interface

4

Low power Dissipation < 2W

Applications

4

10G Ethernet Switches and Routers

4

10G Fibre Channel Switch Infrastructure

4

Metro Edge Switching

 Features

4

Hot-Pluggable XFP Footprint LC  

    Optical Transceiver

4

Digital Diagnostic Function

4

Class 1 Laser International Safety Standard  

    IEC-60825 Compliant

4

Compatible with XFP Multi-Sourcing  

    Agreement (MSA)

4

XFP Optical Transceiver with duplex  

    LC connector

4

10G small Form-Factor Pluggable (XFP)  

    MSA  compatible

4

INF-8077i Digital Diagnostic Function  (DMI)

4

Maximum Link Length of 80 km

4

Single +3.3V Power Supply

4

Low Power Dissipation < 2W

4

RoHS Compliant (all models)

c

27 = 1270nm  

45 = 1450nm

29 = 1290nm  

47 = 1470nm

31 = 1310nm  

49 = 1490nm

33 = 1330nm  

51 = 1510nm

35 = 1350nm  

53 = 1530nm

37 = 1370nm  

55 = 1550nm

39 = 1390nm  

57 = 1570nm

41 = 1410nm  

59 = 1590nm

43 = 1430nm  

61 = 1610nm