Spaun SBK 5503 NFI 842488 User Manual

Product codes
842488
Page of 176
26
www.spaun.com
SA
T IF
SA
T IF
Power Launch Amplifier for cascading with SMK 17xx9 F (A)
SAT IF:
•  Synchronous level adjuster for each
 
SAT IF system
•  A special amplifier / filter design improves the 
 
intermodulation properties of the launch amplifier
 considerably
•  The high selective input filter guarantees that  
interference products of the LNBs cannot drive
 
the amplifiers into saturation
•  An additional output filter ensures that intermodulation
 
products and noise effects do not degrade the
 
terrestrial signal
Terrestrial:
•  The terrestrial input is passive and return path
 
compatible with the possibility of a 18 V (250 mA) remote   
 
current in both directions for an amplifier. 
Miscellaneous:
•  Selective standby function:
 
If all subscribers only watch TV programms of SAT system  
A, only the appropriate LNB is supplied with power. The  
internal logic turns off the power supply of all other LNBs as
 
well as that of the integrated amplifiers.
 
This process results in significant energy savings!
•  Ground clamp
Power-Class
Power Launch Amplifier for large distribution networks / 17 inputs
SBK 171709 NF
12 V
22 kHz
18 V
12 V
22 kHz
18 V
Standby
Dauerbetrieb/
Always On
LNB supply voltage  
selectable for Quattro or 
QUAD-LNB. 
 
Standby or normal operation 
modes selectable for SAT 
reception
Supply voltage selectable
0 V / 18 V
synchronous
-10dB
Synchronous level adjuster for
each SAT IF system
IN
OFF
OUT
IN/OUT
18 V max. 
 250mA
18 V max. 
 250mA
18 V max. 
 500mA
LED control:
green = active
   yellow 
standby
 
 
 
red = DC error
17 DC-decoupled terminating resistors 
are shipped with the SMS 17089 NF to 
terminate the trunk lines. 
ZFR 75 DC /Set (Art.No.: 871511)
Standby Function and
Switch-Mode Power Supply
Energy
  Saver!