Spaun SBK 5503 NFI 842488 User Manual
Product codes
842488
32
www.spaun.com
SA
T IF
SA
T IF
Power Launch Amplifier for cascading with SMK 13xx3 F(A).
SAT IF:
• The power launch amplifier features 12 SAT IF trunkline
inputs and outputs in total for reception and distribution
of 4 SAT IF signals of each SAT system A, B and C
• To ensure logical allocation of the IF signals according
• To ensure logical allocation of the IF signals according
to the DiSEqC circuit criteria, the IF signals must be
connected to the power launch amplifier according to
the marking on the unit
• All IF amplifiers feature an integrated 6 dB slope.
Each SAT system features a synchronous level controller.
Thus an adjustment of different signals up to 10 dB is
• All IF amplifiers feature an integrated 6 dB slope.
Each SAT system features a synchronous level controller.
Thus an adjustment of different signals up to 10 dB is
possible.
Terrestrial:
• The terrestrial input is return path
compatible. Supply voltage selectable in both
directions: 0 V / 18 V (500 mA)
Miscellaneous:
• Selective standby function:
If all subscribers only watch TV programms of SAT system
A, only the appropriate LNB is supplied with power. The
internal logic turns off the power supply of all other LNBs as
well as that of the integrated amplifiers.
This process results in significant energy savings
• Ground clamp
Power-Class
Power Launch Amplifier for large distribution networks / 13 inputs
SBK 131309 NF
12 V
22 kHz
18 V
12 V
22 kHz
18 V
Standby
Dauerbetrieb/
Always On
LNB supply voltage
selectable for Quattro or
QUAD-LNB:
Standby or normal operation
modes selectable for SAT
reception
selectable for Quattro or
QUAD-LNB:
Standby or normal operation
modes selectable for SAT
reception
synchronous
-10dB
Synchronous level adjuster for
each SAT IF system
each SAT IF system
IN
OFF
OUT
IN/OUT
18 V max.
250mA
250mA
18 V max.
250mA
250mA
18 V max.
500mA
500mA
Supply voltage selectable
0 V / 18 V
0 V / 18 V
LED control:
green = active
yellow
=
standby
red = DC error
13 DC-decoupled terminating resistors
are shipped with the SBK 131309 NF to
terminate the trunk lines.
ZFR 75 DC /Set (Art.No.: 871511)
are shipped with the SBK 131309 NF to
terminate the trunk lines.
ZFR 75 DC /Set (Art.No.: 871511)
Standby Function and
Switch-Mode Power Supply
Energy
Saver!