Spaun SBK 5503 NFI 842488 User Manual
Product codes
842488
38
www.spaun.com
SA
T IF
SA
T IF
synchronous
-10dB
Level adjuster for each IF input
to adjust different input levels
to adjust different input levels
SAT
For 8 subscribers.
SAT IF:
• SAT IF amplifiers with precompensating 6 dB slope
• IF selection logic:
• IF selection logic:
Using the analogue control signals 14 / 18 V, 0 /
22kHz and ToneBurst or the DiSEqC commands
Polarity, Band and Position
• The multiswitches support a standby mode. The
SAT IF amplifiers and the LNB remote voltage are
only active when at least one receiver feeds a remote
voltage to its multiswitch outlet
• The multiswitches support DiSEqC 2.0. That means
bidirectional communication between receiver and
multiswitch is possible
Terrestrial:
• Terrestrial input selectable active/passive
• Return path for the use of interactive signals
• Return path for the use of interactive signals
(Triple Play)
Miscellaneous:
• Standby function
• Ground clamp
• Ground clamp
Premium-Class
Cascadable Multiswitch 9 in 8
SMS 9982 NFI
LNB supply voltage selectable
for Quattro or QUAD-LNB
for Quattro or QUAD-LNB
12 V
22 kHz
18 V
Terr.
-15 dB
passive 0 dB
This adjuster allows the reduc-
tion of the terrestrial signal and
the extension of the return path
tion of the terrestrial signal and
the extension of the return path
9 DC-decoupled terminating resistors are
shipped with the SMS 99X2 NF to terminate
the trunk lines.
ZFR 75 DC /Set (Art.No.: 871511)
shipped with the SMS 99X2 NF to terminate
the trunk lines.
ZFR 75 DC /Set (Art.No.: 871511)
Standby Function and
Switch-Mode Power Supply
Energy
Saver!