Spaun SBK 5503 NFI 842488 User Manual

EAN

4040326651049

Inputs

2

SAT Input Level

65 ... 95 dBμV

Tap loss
Terr 5 ... 862 MHz

2 dB

SAT Output Level

82 dBμV

Isolation

> 35 dB

Current consumption max. + LNB

130 mA

Ambient temperature

-20 ... +50 °C

Dimensions (mm)

39 x 107 x 26

SUS 21 F

Another innovation is the SUS 21 F, which enables two 
receivers or a dual tuner receiver (PVR) to be connec-
ted via a single coaxial connection. The device is simply 
plugged onto a conventional multiswitch. For this, the SUS 
21 F uses two subscriber outputs of the multiswitch or of 
a QUAD LNB, which serve as its input signals. A single
coaxial cable can then be led into the dwelling, and used 
to supply either two separate receivers or a PVR (dual 
tuner) receiver. The receivers used must however support 
the single-cable protocol as per EN 50494. The SUS 21 
F is supplied with power via the receiver, or via a mains 
adapter where required (optionally available).

 

•  SCR multiswitch for the distribution of up to 8
 

SAT IF signals and terrestrial.

•  The selection of the SAT IF position is affected
 

by the receiver through a specific DiSEqC

TM

 

command according to EN 50494

•  No limitation on transponder reception
•  All subscriber outputs are automatic gain controlled
•  Multipurpose LED status notification
•  F-input for optional wall power supply
 

(SNG 18/1000, Art.Nr.: 832114)

•  The SUS 21 F has a jack distance of 20 mm and can
 

be  therefore directly connected to almost every 

 

SPAUN multiswitch/cascade. 

•  The terrestrial signal (FM, DVB-T, CATV)
 

is looped through 

•  The reception of the terrestrial signal is also possible
 

when the SAT-receivers are switched off

Optional: 
Universal AC Adapter
SNG 18/1000 (Art. No.: 832114)

1

1076 MHz

2

1178 MHz

Remote voltage 13 V

green

Valid command being executed

green flashing

Short circuit

red

Remote voltage 5 .. 10 V

red flashing

Remote voltage > 15 V

orange

Band

orange flashing