Marmitek LWM1 09534 Leaflet
Product codes
09534
MICROMODULE
• Designed to be concealed in existing switches or wall sockets.
• Transforms a standard wall socket into a Marmitek X-10 controlled socket.
• For use with any model, colour or brand of switching material.
• Transforms a standard wall socket into a Marmitek X-10 controlled socket.
• For use with any model, colour or brand of switching material.
INSTALLERS ONLY
• Make use of all the advantages of the Marmitek X-10 System, while the
technology is totally invisible in your house.
• Both two-way X-10 (AWM2, LWM1, TMA4, TMD4) and one-way X-10
implementation (AW12, LW12).
MicroModules are part of the Marmitek X-10 Home Automation program, a group of products for remote control
of lighting and appliances. The system uses Marmitek X-10 signals via the mains, which makes extra wiring unnec-
essary. Please note: due to heat generation, apply no more than one module per flush socket / central socket!
of lighting and appliances. The system uses Marmitek X-10 signals via the mains, which makes extra wiring unnec-
essary. Please note: due to heat generation, apply no more than one module per flush socket / central socket!
MARMITEK
MICROMODULES
MICROMODULES
X-10 Built-in Modules for use with standard switching material
Remote control of wall sockets anywhere
in the house
Hotel switch / Double-throw switch
Hotel switch with AW12 in Wall Module.
Conventional communication between
switches (via two extra wires).
Control of appliances and lighting via switches and remote control.
All modules in this diagram use the 2-way principle. The status of the modules can be checked on a computer monitor.
Hotel switch / Double-throw switch
When using two-way communication no extra wiring between
the switches is necessary. The AWM2 and the TMD4 can also control
a second X-10 address (e.g. a lamp connected to an LM12,
as shown in the image).