HID Identity ProxPro II 5458BGL00 Leaflet
Product codes
5458BGL00
hidglobal.com
PHYSICAL ACCeSS SoLutIonS
ProxPro® II Reader
new GenerAtIon ProxImItY CArd reAder
HID’s ProxPro® II proximity reader for access control combines performance,
reliability, and ease of installation into a two-piece, weatherproof potted
enclosure. International users will appreciate the multilingual installation
manual, lower voltage requirement and flexible mounting options.
reliability, and ease of installation into a two-piece, weatherproof potted
enclosure. International users will appreciate the multilingual installation
manual, lower voltage requirement and flexible mounting options.
AddItIonAL ProduCt FeAtureS:
Two-piece reader design allows for easy
installation.
installation.
Available with a Wiegand or Clock-and-
Data interface.
Data interface.
Provides high reliability, consistent read
range and low power consumption.
range and low power consumption.
Features include multicolor LED and
internal or host control of the LED and
beeper.
internal or host control of the LED and
beeper.
Mounts directly on metal with minimal
impact on the read range performance.
impact on the read range performance.
Optional kit enables mounting behind
glass.
glass.
FeAture
ProxPro
ProxPro II
multilingual Installation manual
No
Yes
Glass mounting Kit
Yes
Yes
Supply Voltage
12V and 24V
5V and 12V
Voltage range (min/max)
10 / 28.5 VDC
5 / 16 VDC
Current draw (Avg/Peak)
100 / 120 mA
25 / 125 mA
read range at 12 VdC
(Proxcard® II / ISoProx® II)
8" (20 cm) / 7" (17 cm)
9" (22 cm) / 8" (20 cm)
IP rating
IP55
IP55
european / Asian
mounting Holes
No
Yes (Vertical)
weatherproofing method
Rubber O-ring
Fully potted electronics
Cover Installation method
4 screws, then snap in bezel
Snap-on cover
Custom molded Logo
No
Available (one-time tooling
charge)
termination method
Screw Terminals
Wire pigtail
metal Compensation
Jumper
No, but provides equivalent
performance on metal
Led / Beeper Configuration
DIP Switch or Command Card
Command Card
Custom Firmaware
Socketed Processor, Change
Part
Order from factory
tamper Switch
Yes
No, but electronics
are potted to prevent
tampering
Keypad Version Available
Yes
No
wiegand Pullup Select 5 or 12V
DIP Switch
No
Serial Version Available
Yes
No
Compare features of the ProxPro II to the original ProxPro reader (still available):