Kramer Electronics WP-561 Leaflet

 

Active Wall Plate 

− 

HDMI over Twisted Pair Transmitter

 

 

The WP

−

561 is a DGKat™ twisted pair 

transmitter for HDMI and IR signals. The 
WP

−

561 converts an HDMI and IR signal to 

a twisted pair signal and the WP

−

562 

converts the twisted pair signal back to an 
HDMI and IR signal. 

Max. Data Rate

 - 1.65Gbps.

 

 

HDTV Compatible.  

HDCP Compliant.  

DGKat™ Signal Integration

 - Kramer’s unique technology for converting TMDS as well as control and communication 

to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed 
specifically for optimum performance.

  

Bidirectional IR Support

 - IR is compatible with a Kramer transmitter and via a Kramer external remote IR receiver: 

C

−

A35M/IRR or C

−

A35M/IRE or C

−

A35M/2IRE.

  

HDMI Support

 - HDMI (V.1.4 with HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS

−

HD).

  

EDID PassThru

 - Passes EDID/HDCP signals from source to display.

  

Optional IR Emitter Cables

 - C

−

A35/IRE

−

10 single emitter & C

−

A35/2IRE

−

10 dual emitter.

  

Optional External IR Receiver Cables

 - C

−

A35M/IRR

−

3 and C

−

A35M/IRR

−

50.

  

System Range

 - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC

−

DGKat524 cable. Up to 

90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC

−

DGKat623 cable. Up to 100m (330ft) at 1080i or 

up to 90m (295ft) at 1080p on shielded BC

−

DGKat7a23 cable.

  

Cable

 - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's 

BC

−

DGKat524, BC

−

DGKat623 and BC

−

DGKat7a23 cables. Note that the transmission range depends on the signal 

resolution, graphics card and display used. The distance using non

−

Kramer CAT 5, CAT 6, and CAT 7 cables may 

not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.

  

Status LEDs

 - ON (red), transmit (green).

  

Power Connect™ System

 - A single connection to the transmitter powers the receiver.

  

Dimensions

 - 6.9cm x 2.88cm x 11.4cm (2.71" x 1.13" x 4.49") US; 8.6cm x 2.88cm x 8.6cm (3.39" x 1.13" x 3.39") and 

8cm x 2.88cm x 8cm (3.15" x 1.13" x 3.15") EU W, D, H.

  

Wall Plate Size

 - 1 gang EU/US.

  

FEATURES