Kramer Electronics HDMI over Twisted Pair Transmitter PT-571 Leaflet

Product codes

PT-571

PT-571

HDMI over Twisted Pair Transmitter

The PT

−

571 is a DGKat™ twisted pair

transmitter for HDMI signals. The PT

−

571

converts an HDMI signal to a single twisted
pair signal and the PT

−

572 converts the

twisted pair signal back to an HDMI signal.

Max. Data Rate

- 1.65Gbps.

HDTV Compatible.

HDCP Compliant.

DGKat™ Signal Integration

- Kramer’s unique technology for converting TMDS as well as control and communication

to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed
specifically for optimum performance.

HDMI Support

- HDMI (V.1.4 with Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby

TrueHD, DTS

−

HD).

3D Pass-Through.

System Range

- Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC

−

DGKat524 cable. Up to

90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC

−

DGKat623 cable. Up to 100m (330ft) at 1080i or

up to 90m (295ft) at 1080p on shielded BC

−

DGKat7a23 cable.

Cable

- Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's

−

DGKat524, BC

−

DGKat623 and BC

−

DGKat7a23 cables. Note that the transmission range depends on the signal

resolution, graphics card and display used. The distance using non

−

Kramer CAT 5, CAT 6, and CAT 7 cables may

not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.

EDID PassThru

- Passes EDID signals between the source and display.

Status LED

- Lights red when receiving power only, orange when output and power are attached, and yellow when

both an active input and output are attached.

Power Connect™ System

- A single connection to the transmitter powers the receiver.

Ultra-Compact Pico TOOLS™

- 4 units can be rack mounted side

−

side in a 1U rack space with the optional

−

4PT rack adapter.

FEATURES