Brodit ProClip 854725 Leaflet

1.

2.

4.

3.

Please read all of the instructions and look at the pictures before attaching the ProClip.  
 
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Press the thin end of the
enclosed gap opener into the gap between the frame surrounding the display and the panel surrounding the air
vent, to widen the gap. Peel off the adhesive tape covers on the ProClip. Press the angled edge on the upper part
of the ProClip into the gap next to the gap opener. Press down on top of the ProClip so the angled edge goes all
the way into the gap. Pull out the gap opener.  
 
2. Pull the lower part of the ProClip downward and hook the angled edge under the panel surrounding the air
vent. Press upward on the lower part of the ProClip so the angled edge goes all the way into the gap.  
 
3. This ProClip can be placed anywhere within the width of the display.  
 
4. The ProClip is in place.