Telegärtner H06000A0001 User Manual
RJ45 Components
A
Patch Panels and Distributors
3
Telegärtner Karl Gärtner GmbH • Tel: +49-(0)7157 / 1 25-100 • www.telegaertner.com
110
3.6
Mini Distributor
Networks which have a small number of subscribers require
simple and cost-effective distributors without 19“ racks and
separate EDP rooms. For this purpose we have developed
distributors which are suitable as cable distributors or
as connection devices for groups of participants at their
workdesk. Up to 12 subscribers can be connected using
simple and cost-effective distributors without 19“ racks and
separate EDP rooms. For this purpose we have developed
distributors which are suitable as cable distributors or
as connection devices for groups of participants at their
workdesk. Up to 12 subscribers can be connected using
shielded or unshielded installation cabling.
The cables can be led into the housing from behind or from
below; the distributor can be affixed to the wall, in a cable
duct or simply placed on to the desk. A 19“ rack mount
version (with 3 HU) is also available.
The cables can be led into the housing from behind or from
below; the distributor can be affixed to the wall, in a cable
duct or simply placed on to the desk. A 19“ rack mount
version (with 3 HU) is also available.
Performance Characteristics
• Mini distributor MPD6 and MPD12 with 6 resp.
12 RJ45 jacks assembled on one common PCB
• Mini distributors MPD8 AMJ/UMJ and MPD12 AMJ/UMJ
for 8 resp. 12 AMJ/UMJ modules or couplers
• printed circuit board is mounted horizontally in the
housing, shielded versions are provided inside with a metal
shielding cover; in addition, an earth connection cable can
be connected to the PCB (with screw M4)
shielding cover; in addition, an earth connection cable can
be connected to the PCB (with screw M4)
• no special tooling required for mounting of cover
(shielded
(shielded
type)
• enclosed cable ties for strain relief of the cables without
need of screws and special tools
• 360 degrees shielding of MPD-HS can be connected
directly on the PCB on a large contact spot using a screw
clamp without need of twisting the braid
clamp without need of twisting the braid
• cables are terminated via IDC (LSA Plus) terminals with
colour coding acc. to EIA/TIA 568A and B
• limit of 13 mm max. of untwisted length of wires can be
easily achieved without restricting an easy installation
• housing made of thermoplastic, halogene-free, with non-
slip bumpers
• shielding cover made of stainless steel
• 19“ rack-mount design size 3 HU/8 PU with 6xRJ45 and
• 19“ rack-mount design size 3 HU/8 PU with 6xRJ45 and
3 HU/10 PU with 12xRJ45 available, front plate anodized
aluminum
aluminum
• Cat.6
A
- & Cat.6A types with overbending protection:
suitable for 6- (RJ11/12) and 8-pin connectors (RJ45); can
be used in the modular jack without additional installation
kits
be used in the modular jack without additional installation
kits
Mini Distributor MPD6 K Cat.6
A
& Cat.6A
3.6.1
Order no.
Short name
Type
Remarks
Colour
J02021A0051
MPD6-HS K Cat.6
A
shielded
GHMT
light grey RAL 7035
J02021A0050
MPD6-HS K Cat.6
A
shielded
GHMT
alpine white
J02021A0053
MPD6-H K Cat.6A
unshielded, without cover
light grey RAL 7035
Order no.
Short name
Type
B05002A0011
Marking strip für MPD6 (J02021A0051, J02021A0053, J02021A0050)
12 x 132 mm, self adhesive