Telegärtner H06000A0001 User Manual

RJ45 Components

A

Outlets

1

Telegärtner Karl Gärtner GmbH  •  Tel: +49-(0)7157 / 1 25-100  •  www.telegaertner.com

62

1.1

Series AMJ45 K Cat.6

A

, Class E

A

 500, Cat.5e - shielded

Performance Characteristics

•  Transmission performance: Cat.6

A

 acc. to ISO/IEC 11801; 

EN 50173-1

• full shielded
•  360° shielding contact and strain relief by means of two 

(one, in the case of Cat.5e) separate, captive screw 
clamps for the exterior cable jacket and shielding

•  can be wired up from all directions, in 8x45° steps; enables 

reduction in stock diversity

•  either horizontal or vertical installation in the cable duct as 

a result of variable cable inlet

•  Type offers low installtion depth; problem-free installation 

in floor tanks as a result of cable inlet form the side within 
the subfloor mounting box

•  dust cover flaps

•  option of plug-in ground connection at all four corners; 

according to DIN 46342-1; 6,3 mm

•  can be combined with covers for a wide variety of 

switching programs

•  simple wire presorting guarantees wires will be laid without 

damage and good transmission performance

•  cover plate can be retrofitted with a flip-up loss-proof, 

transparent label field

•  detachable vertical fixing rail of the four-hole bearer ring 

(e. g. for subfloor installation)

•  Overbend protection: 6- (RJ11/12) and 8-pin connectors 

(RJ45) can be used interchangeably in the MJ outlets 
without additional installation kits

Note: Labelling masters for AMJ45 and UMJ45 and a cross-reference-list for switching programs several manufacturers can be found on 
our homepage www.telegaertner.com.

1.1.1

RJ45 pin colour coding acc. to EIA/TIA 568 A and B

EIA/TIA 568 A

PIN

RJ45

EIA/TIA 568 B

RJ45

AMJ45 K Cat.6

A

 shielded

 

 

–

J00020A0500

AMJ45 8/8 K Up/50 Cat.6

A

cable duct mounting, 2xRJ45

alpine white

J00020A0501

AMJ45 8/8 K Up/50 Cat.6

A

cable duct mounting, 2xRJ45

pearl white RAL 1013