Mobotix MX-Keypad1-EXT-AM MX-KEYPAD1-EXT-AM User Manual

Product codes
MX-KEYPAD1-EXT-AM
Page of 150
6
/148
© MOBOTIX AG  •  Security-Vision-Systems  •  Made in Germany
www.mobotix.com  •  info@mobotix.com
Important Notes
Electrical Installation 
Electrical systems and equipment may only be set up, changed and maintained 
by a qualified electrician or under the management and supervision of a qualified 
electrician in accordance with electrotechnical regulations.
Legal Aspects Of Video And Audio Recording
When using MOBOTIX products, privacy and data protection regulations regarding 
video and audio recording must be observed. Depending on the country and ins-
tallation site of the IP Video Door Station, the recording of video and audio data 
may be subject to special constraints or may be prohibited. All users of MOBOTIX 
products are therefore requested to inform themselves of and comply with all currently 
applicable regulations. MOBOTIX AG will not assume any responsibility for product 
use that does not comply with the local laws.
Network Security
MOBOTIX products combine all necessary configuration options for operating in 
Ethernet networks in a manner that complies with data protection regulations. The 
operator is responsible for the data protection concept across the entire system. The 
necessary basic settings to prevent misuse can be configured in the software and 
are password protected. This prevents unauthorized access by unknown parties.
Risk Of Overheating When Exposed To Direct Sunlight
When mounting black, dark gray or amber-colored T24 IP Video Door Stations in 
locations where the device is exposed to direct sunlight, the housing temperature 
can exceed the maximum allowed temperature limit.
This can result in electronic failures and 
injuries especially when touching exterior 
metal parts. If the intended use of the 
device is at an (unprotected) outdoor 
location, you should only install white 
or silver-colored modules and frames.
Do Not Remove Lens Cover
The camera module of the door station may not be operated without the installed 
transparent  lens  cover.  The  camera  is  no  longer  weather-proof  when  operated 
without the lens cover; the removal of the cover exposes the metal ring around the 
lens, which is especially prone to overheat in high temperatures. Therefore, anyone 
who touches the ring with their bare hand is at risk of being burned.
§
T24 System Manual Part 1: Inhalt