D-Link DGS-1500-28P User Manual

Page of 6
Green Technology
IEEE 802.3az EEE
Power saving via LED and Port shutoff
Power saving via Port Standby
Power saving via System Hibernation
Power saving via Cable Length detection
Power saving via Link Status detection
Time-based PoE (DGS-1500-28P
1
 only)
Security Features
Access Control List secures network
D-Link Safeguard Engine protects CPU from 
Broadcast/Multicast/Unicast Flooding
Port Security supports 64 MACs per port
ARP Spoofing Prevention
SSL
Intuitive Management
SmartConsole utility or Web-based GUI
Single IP Management (Virtual Stacking)
Built-in SNMP MIB for remote NMS  
(D-View 6.0)
VoIP Deployment
Highest priority for VoIP services
Auto Voice VLAN
QoS (Quality of Service)
Supports IEEE 802.1p QoS,  
up to four Priority Queues per port
Bandwidth Control
DSCP
Advanced Features
Layer 3 Static Routing
IPv6 support
2
Auto Surveillance VLAN
Loopback Detection automatically disables 
a port or VLAN when a loop is detected
Cable Diagnostics allows administrators  
to determine cable status
Configurable MDI/MDIX
LLDP/LLDP-MED
Trap & Logs
SNMP Trap
Trap for SmartConsole Utility
Online Help
Link to local support website
Online User Guide
DGS-1500 SmartPro Family
Switching
 
DGS-1500 SmartPro Family
1
 DGS-1500-28P will be released in late 2011.
2
 IPv6 Ready Logo Phase II will be obtained in the future. IPv6 support will be available in a future release.
D-Link’s DGS-1500 Series SmartPro switches 
are designed for businesses which require 
functions such as L3 Static Routing and Single 
IP Management (Virtual Stacking) without 
upgrading to a managed switch. This series 
integrates advanced management and 
security functions that are similar to those 
of a managed switch, but less complex. 
The switches feature D-Link Green
TM
 3.0 
technology which enables significant power 
savings. Additionally, the DGS-1500-28P
1
’s 
10/100/1000 Mbps ports are PoE-enabled, 
offering ease-of-use and green features like 
Time-based PoE, which enables the power 
to the port to be shut off at a predetermined 
time. Compliant with 802.3af and 802.3at, 
these switches are capable of feeding power 
to devices of up to 30 Watts. Management 
options include SNMP, Web Management, 
SmartConsole Utility, and Compact CLI. The 
series also supports ACL filtering and D-Link’s 
Safeguard Engine to protect the network. 
The DGS-1500-20 and DGS-1500-28 both 
feature a fanless design. The fanless design 
allows them to emit less heat and noise than 
a standard switch, making them suitable for 
office environments. The DGS-1500-28P
1
 and 
DGS-1500-52 both feature smart fans. Using 
a thermal sensor that can detect temperature 
change, the smart fans can react accordingly 
by utilising different fan speeds for different 
temperatures. 
Advanced Features 
The DGS-1500 Series integrates advanced 
features such as Virtual Stacking and Layer 3 
features like Static Routing. Virtual Stacking 
reduces the number of IP addresses needed 
on a network by configuring up to 32 devices 
to appear as a single unit with one IP address. 
This simplifies network management for small 
workgroups and allows for switches to be 
added without special cabling. 
Extensive Layer 2 Features
These switches are equipped with a complete 
lineup of Layer 2 features including IGMP 
Snooping, Port Mirroring, Spanning Tree, and 
Link Layer Discovery Protocol (LLDP). The IEEE 
802.3x Flow Control function allows servers to 
directly connect to the switch for fast, reliable 
data transfer. At 2000 Mbps Full Duplex, 
the Gigabit ports provide high-speed data 
pipes to servers with minimum data transfer 
loss. Network maintenance features include 
Loopback Detection and Cable Diagnostics. 
Loopback Detection is used to detect loops 
created by a specific port or VLAN and 
automatically shut down the affected port or 
VLAN. The Cable Diagnostics feature, designed 
primarily for adminstrators and customer 
service representatives, can quickly discover 
the type of error on cables and determine the 
cable quality.  
QoS, Bandwidth Control
The DGS-1500 Series supports Auto 
Surveillance VLAN (ASV) and Auto Voice VLAN, 
which are best suited for VoIP and video 
surveillance deployments. Auto Surveillance 
VLAN is a new, industry-leading technology 
built into D-Link Smart Switches. This 
technology consolidates data and surveillance 
video transmission through a single SmartPro 
switch, thus sparing businesses the expense 
of maintaining dedicated hardware and 
facilities. ASV also ensures the quality of 
real-time video for monitoring and control 
without compromising the transmission of 
conventional network data. The Auto Voice 
VLAN technology enhances VoIP service by 
automatically placing voice traffic from an 
IP phone to an assigned VLAN. With higher 
priority and an individual VLAN, these features 
guarantee the quality and security of VoIP 
traffic. Furthermore, the DSCP markings on 
Ethernet packets enable different levels of 
service to be assigned to network traffic. 
5
Stackability
Virtual Stacking/Clustering  
of up to 32 units 
-
 Supports D-Link Single IP Management
L2 Features
 MAC  Address  Table   
-
 16 K entries
Flow Control 
-
 802.3x Flow Control 
-
 HOL Blocking Prevention
 IGMP Snooping 
-
 IGMP v1/v2 Snooping 
-
 Supports 256 IGMP groups 
-
  Supports at least 64  
static multicast addresses 
-
 IGMP per VLAN 
-
 Supports IGMP Snooping Querier
Spanning Tree Protocol 
-
 802.1D STP 
-
 802.1w RSTP
Loopback Detection
802.3ad Link Aggregation 
-
  DGS-1500-20: Max. 10 groups  
per device, 8 ports per group
DGS-1500-28/DGS-1500-28P
4
: Max.  
14 groups per device, 8 ports per group 
-
  DGS-1500-52: Max. 26 groups per 
device, 8 ports per group
Port Mirroring 
-
 One-to-One 
-
 Many-to-One 
-
 Supports Mirroring for Tx/Rx/Both
Cable Diagnostics
Configurable MDI/MDIX
Multicast Filtering 
-
 Forwards all unregistered groups 
-
 Filters all unregistered groups
Jumbo Frame 
-
 Up to 10,000 bytes
LLDP
LLDP-MED
L2 Multicast Filtering
VLAN
802.1Q
VLAN Group 
-
 Max. 4K static VLAN groups 
-
 Max. 4094 VIDs
GVRP 
-
 Up to 256 dynamic VLANs
Asymmetric VLAN
Auto Voice VLAN 
-
 Max. 10 user defined OUI 
-
 Max. 8 default OUI
Auto Surveillance VLAN
QoS (Quality of Service)
802.1p Quality of Service
4 queues per port
Queue Handling 
-
 Strict 
-
 Weighted Round Robin (WRR)
CoS based on 
-
 802.1p Priority Queues 
-
 DSCP 
-
 ToS
5
 
-
 IPv6 Traffic Class
5
 
-
 IPv6 flow label
5
 
-
 TCP/UDP port
5
Bandwidth Control
Port-based (Ingress/Egress, min. 
granularity 10/100/1000 is 64 Kb/s)
L3 Features
ARP 
-
 64 Static ARP 
-
 Supports Gratuitous ARP
IPv6 Neighbour Discovery (ND)
5
IP Interface 
-
 Supports 4 interfaces
L3 Routing
Default Routing
Static Routing 
-
 32 IPv4 Static Route Entries 
-
 Max. 128 IPv4 Host Routes
Access Control List (ACL)
DGS-1500-20/28/28P
4
 
-
 Max. 50 profiles 
-
 Max. 200 rules shared by profiles 
-
  Each rule can be associated with  
a single port or multiple ports
DGS-1500-52: 
-
 Max. 50 profiles 
-
 Max. 450 rules shared by profiles 
-
  Each rule can only be associated 
with a single port
ACL based on 
-
 MAC Address 
-
 IPv4 Address (ICMP/IGMP/TCP/UDP)  
-
 802.1p 
-
 DSCP Ethernet type
Security
802.1X Port-based Access Control
Port Security 
-
  Supports up to 64 MAC  
addresses per port
Broadcast/Multicast/ 
Unicast Storm Control
D-Link Safeguard Engine
TM
DHCP Server Screening
IP-MAC-Port Binding
5
 
-
 Supports 512 address binding entries 
-
 ARP mode 
-
 Supports DHCP Snooping
ARP Spoofing Prevention 
-
 Max. 64 entries
Traffic Segmentation
SSL 
-
 Supports v1/v2/v3 
-
 Supports IPv6
5
AAA
802.1X Authentication 
-
 Supports local/RADIUS database 
-
 Supports Port-based access control 
-
 Supports EAP, OTP, TLS, TTLS, PEAP
IPv6 RADIUS Server
5
MIB
1213 MIB II
1493 Bridge MIB
1907 SNMP v2 MIB
1215 Trap Convention MIB
2233 Interface Group MIB
D-Link Private MIB
LLDP MIB
Power-Ethernet MIB
6
RFC Standard Compliance
RFC 783 TFTP
RFC 854 Telnet Server
RFC 951 BootP/DHCP Client
RFC 1157 SNMP v1, v2, v3
RFC 1213 MIB II
RFC 1215 MIB Traps Convention
RFC 1350 TFTP
RFC 1493 Bridge MIB
RFC 1769 SNTP
RFC 1542 BootP/DHCP Client
RFC 1901 SNMP v1, v2, v3
RFC 1907 SNMP v2 MIB
RFC 1908 SNMP v1, v2, v3
RFC 2068 FCS
RFC 2131 BootP/DHCP Client
RFC 2138 RADIUS Authentication
RFC 2139 RADIUS Authentication
RFC 2233 Interface Group MIB
RFC-2246 SSL
RFC 2475
RFC 2570 SNMP v1, v2, v3
RFC 2575 SNMP v1, v2, v3
RFC 2598 CoS
RFC 2616 FCS
RFC 2618 RADIUS Authentication
RFC 2819 RMON v1
RFC 2865 RADIUS Authentication
RFC 3164 System Log
RFC 3195 System Log
RFC 3411-17 SNMP
RFC 3621 Power Ethernet MIB
Switching
 
DGS-1500 SmartPro Family
DGS-1500 SmartPro Family
Software Features
6
OAM
Cable Diagnostics
Factory Reset
Management
Web-based GUI
Single IP Management
Compact CLI
Telnet Server
TFTP Client
Configurable MDI/MDIX
SNMP 
-
 Supports v1/v2/v3
SNMP Trap
Trap for SmartConsole Utility
System Log 
-
 Max. 500 log entries
BootP/DHCP Client
SNTP
ICMP v6
5
IPv4/v6 Dual Stack
5
DHCP Auto Configuration
Debug Command
Time Setting 
-
 SNTP
RMON1
Trusted Host
Time-based PoE
6
User Account
Upload/Download Configuration file
Backup/Upgrade firmware
Smart Wizard
Green
Power Saving by: 
-
 Link Status 
-
 Cable Length 
-
 LED Shutoff 
-
 Port Standby 
-
 System Hibernation
Certification
IPv6 Core Ready Logo Phase II
5
Switching
 
DGS-1500 SmartPro Family
D-Link European Headquarters. D-Link (Europe) Ltd., D-Link House, Abbey Road, Park Royal, London, NW10 7BX. Specifications are subject to change without notice. D-Link is a registered  
trademark of D-Link Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners. ©2011 D-Link Corporation. All rights reserved. Europe Release September 2011
I
US
C
ACN 052 202 838
4  
DGS-1500-28P will be released in late 2011. 
5    
Will be available in a future release in 2012. IPv6 Ready Logo Phase II will be obtained in the future.
6   
Available for DGS-1500-28P only.
4  
DGS-1500-28P will be released in late 2011. 
5    
Will be available in a future release in 2012. IPv6 Ready Logo Phase II will be obtained in the future.
6   
Available for DGS-1500-28P only.
Software Features
For further information: www.dlink.eu
DGS-1500 SmartPro Family
dlink
Supported by DGS-1500-20/28/28P
4
DGS-712 
1000BASE-T Copper
DEM-310GT
1000BASE-LX, Single-mode, 10 km
DEM-311GT
1000BASE-SX, Multi-mode, 550 m
DEM-312GT2 1000BASE-SX, Multi-mode, 2 km
DEM-314GT
1000BASE-LHX, Single-mode, 50 km
DEM-315GT
1000BASE-ZX, Single -mode, 80km
Supported by DGS-1500-52
DGS-712
1000BASE-T Copper
DEM-310GT
1000BASE-LX, Single-mode, 10 km
DEM-311GT
1000BASE-SX, Multi-mode, 550 m
DEM-312GT2 1000BASE-SX, Multi-mode, 2 km
DEM-314GT
1000BASE-LHX, Single-mode, 50km
DEM-315GT
1000BASE-ZX, Single-mode, 80km 
DEM-210
100BASE-BX, Single-mode, 15 km
DEM-211
100BASE-BX, Multi-mode, 2 km
Optional Products
Optional SFP Transceivers
Optional WDM SFP Transceivers
Supported by DGS-1500-20/28/28P
4
DEM-330T/R
Gigabit 
Wavelength Tx:1550 nm, Rx:1310 nm 
Single-mode, 10 km
DEM-331T/R
Gigabit 
Wavelength Tx:1550 nm, Rx:1310 nm 
Single-mode, 40 km
Supported by DGS-1500-52
DEM-330T/R
Gigabit 
Wavelength Tx:1550 nm, Rx:1310 nm 
Single-mode, 10 km
DEM-331T/R
Gigabit 
Wavelength Tx:1550 nm, Rx:1310 nm 
Single-mode, 40 km
Optional Management Software
Supported by DGS-1500-20/28/28P
4
/52
DV-600S
D-View 6.0 Network Management 
System (Standard Edition)
DV-600P
D-View 6.0 Network Management 
System (Professional Edition)
Supported by DGS-1500-28P
4
DPS-700
589 Watts Redundant Power Supply
370 Watts PoE Power Budget
Optional Redundant Power Supply