Belkin PureAV Power Line Sniffer AP00002EA User Manual
Product codes
AP00002EA
Introduction:
This Sniffer demonstration unit is used to provide a visual and
audible representation of AC-power-line noise that is detected within
an 115VAC or 230VAC electrical circuit at 50/60Hz.
audible representation of AC-power-line noise that is detected within
an 115VAC or 230VAC electrical circuit at 50/60Hz.
Technical Specifications:
Input Power Supply:
115VAC or 230VAC +/-10%; 50/60Hz
Operating Current:
30mA max
Noise-Frequency
Detection Range:
Detection Range:
100Hz to 2MHz
Operating Temperature:
0° C to 40° C; Humidity: 0% to 90%
Dimensions:
192.3 (L) x 100.6 (W) x 52.0mm (H)
Weight:
0.7kg.
Operation Procedure:
Step 1: Select Power-Supply Setting (Figure 1)
The default setting for the input power supply is 115V. If you are in
a 230V power environment, please set the “power supply selection
switch” to 230V. The input power-supply voltage (115V or 230V) will
be visible directly on the switch for your verification.
a 230V power environment, please set the “power supply selection
switch” to 230V. The input power-supply voltage (115V or 230V) will
be visible directly on the switch for your verification.
Caution: You must verify that the correct input power voltage is
selected, or the unit will be damaged if the switch is not in the
proper position.
selected, or the unit will be damaged if the switch is not in the
proper position.
Step 2: Power-Supply Connection (Figure 1 and Figure 2)
Connect the included power cable to the Sniffer. Once the power
cable is connected, the “Power On/Off” LED will illuminate and the
liquid crystal display (LCD) will display the line-noise status.
cable is connected, the “Power On/Off” LED will illuminate and the
liquid crystal display (LCD) will display the line-noise status.
Note: To silence the loudspeaker, please press the “Sound”
button once.
button once.
1
P75338uk_AP00002uk.indd 4
28/12/06 11:49:35 am