Transition Networks Point System CFMFF1315-200 Leaflet

4

Connect single mode fiber cable to   

    devices with multimode ports

4

Protocol Transparency

4

Can be used with any Point System™ Chassis 

     

see also: 

Fast Ethernet ot ATM/OC-3/SDH/SONET Stand-Alone Optical Mode Converter 

Features

4

Link Pass Through  

4

Automatic Link Restoration  

4

Field Upgradeable Firmware 

4

Card Manageability:

• MM/SM signal detect
• Hardware/software mode
• Fiber port enable/disable multimode or  
   single mode

Extend Network Distance         

Convert multimode 100-155 Mbps interfaces 
to single mode fiber on a port-by-port basis 
and extend ATM or Fast Ethernet over single 
mode fiber up to 80 km.

Specifications

Standards 

 

IEEE Std. 802.3™

3-position Jumper 

Hardware: Software mode is disabled 

  

Software: Converter mode is determined by most  

 

 

 

recently saved on-board microprocessor settings

Status LEDs   

Power: Steady green LED indicates connection  

 

 

to external AC power 

  

LKS (Single mode Fiber Link): Steady LED  

 

 

 

indicates single mode fiber link 

  

LKM (Multimode Fiber Link): Steady LED  

 

 

 

indicates multimode fiber link

Dimensions  

Width: 0.86” [22 mm] 

  

Depth: 5.0” [127 mm] 

  

Height: 3.4” [86 mm]

Power Consumption 

3.5 Watts

Environment   

See chassis specifications

Shipping Weight 

1 lb. [0.45 kg]

Regulatory Compliance 

UL Listed; C-UL Listed (Canada); CISPR/EN55022  

 

 

 

Class B; EN55024; EN61000; FCC Class B; CE Mark

Warranty  

Lifetime

Extend Network Distance

Ordering Info: Class B

  1300nm multimode (SC) 

to  1300nm multimode (SC) 

  1300nm multimode (SC) 

to  1310nm single mode (SC)

  1300nm multimode (SC) 

to  1310nm single mode (SC)

  1300nm multimode (SC) 

to  1310nm single mode (SC)

  1300nm multimode (SC) 

to  1550nm single mode (SC)

  1310nm single mode (SC)

to  1310nm single mode (SC)

  1310nm single mode (SC)

to  1310nm single mode (SC)