Transition Networks SSEFE1015-100 Leaflet

Fast Ethernet

Use the 100BASE-TX to 100BASE-FX setting to extend 

the distance between any two 100BASE-TX devices up 

to 40 km (24.9 mi.) using single mode fiber. Or interface 

directly with a 100BASE-FX compliant port on any de-

vice to provide a 100BASE-TX port interface.

Features

4

AutoCross™ [

4

Link Pass Through 

4

Automatic Link Restoration 

Specifications

Standards 

 

IEEE Std. 802.3

Switches  

Switch 1: Link Pass Through on/off 

  

Switch 2: 10 Mb or 100 Mb operation

Status LEDs   

PWR (Power): Lit for normal operation 

  

F-ACT (Fiber Activity): Blinking = data reception on  

 

 

the fiber link 

  

F-100 (Fiber Speed): ON = link at 100 Mb 

  

F-10 (Fiber Speed): ON = link at 10 Mb 

  

C-ACT (Copper Activity): Blinking = data reception  

 

 

on the copper link 

  

C-100 (Copper Speed): ON = link at 100 Mb 

  

C-10 (Copper Speed): ON = link at 10 Mb

Dimensions  

Width: 3.25” [82 mm] 

  

Depth: 4.8” [122 mm] 

  

Height: 1.0” [25 mm]

Power Consumption 

3.6 Watts

Power 

 

External AC/DC required; 12 VDC, 0.5A;    

 

 

unregulated; standard (provided)

Environment   

0 – 50°C operating;  

 

 

5% – 95% humidity non-condensing; 

 

 

0 – 10,000 ft. altitude

Shipping Weight 

2 lbs. [0.90 kg]

Safety Compliance 

Wall Mount Power Supply: 

 

 

UL Listed; C-UL Listed (Canada)

Regulatory Compliance 

CISPR/EN55022 Class A; EN55024; EN60950 Class A;  

 

 

FCC Class A; CE Mark

Warranty  

Lifetime

Transition Networks’ speed selectable copper to fiber Media 
Converter allows you to extend the distance between copper 
based connections with the use of fiber optic cable. The ability 
to select the speed of converter allows for easy migration from 
a 10 Mbps network today to a 100 Mbps network in the future. 
This converter is a true layer 1 device as both the copper and 
fiber ports operate at the same speed setting (i.e. 100BASE-TX 
to 100BASE-FX). For 10 Mbps applications, these devices must 
be used in pairs.

see also: Ethernet or Fast Ethernet Speed Selectable Point System™ Slide-In-Module Media Converters 

Ethernet

Use the 10BASE-T to 10BASE-FL speed setting (back-

to-back) to extend the distance between two 10BASE-

T devices up to 40 km (24.9 mi.) using single mode 

fiber without a repeater.

 

The converter can be set to 10 Mbps or 100 Mbps. Both copper 
and fiber ports are automatically set to the same speed.

Ordering Information

  10BASE-T or 100BASE-TX (RJ-45) 

to  10BASE-FL or 100BASE-FX 1310nm SM 

(ST)

  10BASE-T or 100BASE-TX (RJ-45) 

to  10BASE or 100BASE 1310nm SM (SC)

  10BASE-T or 100BASE-TX (RJ-45) 

to  10BASE or 100BASE 1310nm SM (SC)

  10BASE-T or 100BASE-TX (RJ-45) 

to  10BASE or 100BASE 1310nm SM (ST)

Recommended use in pairs 

  10BASE-T or 100BASE-TX (RJ-45) 

to  10BASE-FL or 100BASE-FX 1310nm TX/ 

1550nm RX single fiber SM (SC) 

  10BASE-T or 100BASE-TX (RJ-45) 

to  10BASE-FL or 100BASE-FX 1550nm TX/ 

1310nm RX single fiber SM (SC) 

 

Optional Accessories (sold separately)

     Piggy Back Power Supply

     Stand-Alone Power Supply

     12-Slot Media Converter Rack

      4-Slot Media Converter Shelf

      DIN Rail Bracket 5.0” [127 mm]

      DIN Rail Bracket (Extended) 4.3”[109 mm]

       DIN Rail Bracket (flat) 3.3” [84 mm]

      Wall Mount Bracket 4.0” [102 mm]

       Vertical Wall Mount Bracket 5.0” [127 mm]

     Extended Vertical Mount 4.7” [119 mm]