Roberts Radio RD60 Revival RD60-PURPLE User Manual

Your radio will normally scan for FM broadcasts which are strong enough 
to give good reception. However, you may wish the Auto-scan function 
to also be able to fi nd weaker signals, possibly from more distant radio 
transmitters. Your radio includes a local / distant option for the Auto-scan 
function.

1. Press 

the 

On/Off button to switch on your radio.

2.  If needed, press the Band button to select the FM band.

3.  Press and hold the Info button until the display shows "FM Scan 

Zone" then press the Tuning control to enter the scan zone selection 
menu. 

4. Rotate 

the 

Tuning control to switch between Local and Distant options 

on the lower line of the display. The Distant option will allow the radio 
to fi nd weaker signals when scanning.

5.  Press and release the Tuning control to confi rm your selection. The 

radio will then revert to the normal information display. The Local or 
Distant setting is stored in the radio and remains in force until changed 
or until a System Reset.

Note: The initial setting (out of the box, or after a System Reset) causes 
the radio to ignore weaker (or more distant) signals.

1

2

3-5

3