Transition Networks SISTM1014-162-LRT Leaflet
Industrial
Specifications
Standards
IEEE Std. 802.3, 802.1p, 802.1Q, 802.3u, 802.1d, 802.1w, 802.3x
Status LEDs
PWR (Power): ON = power connected
R.M.: ON = Device is the Master in the redundant ring network
PWR 1 (Power): ON = primary power connected
PWR 2 (Power): ON = backup power connected
Fault: ON = Fault on port link or loss of PWR 1 or PWR 2
LNK/ACT (Fiber): ON = Link on fiber 100 Mbps;
Flashing = data transmitting
FDX/COL (Fiber): ON = Full duplex link on fiber;
Flashing = collisions occurring
Data Transfer Rate
10BASE-T: 14,880 pps; 100BASE-TX: 148,800 pps
MAC Addresses
2K
Max Packet Size
1536 bytes
Data Memory Buffer
1 Mb
Backplane
2.0 Gbps
SNMP MIB
RFC 1213 MIBII, RFC 1493 Bridge MIB, RMON RFC 1757, RFC 2674
VLAN MIB, RFC 1643 Ethernet like MIB, RFC 1215 Trap MIB
Dimensions
Width: 2.1” [54 mm]
Depth: 4.1” [105 mm]
Height: 5.3” [135 mm]
Ingress Protection
IP 31
Input Power
12 to 48 VDC, 0.2A, redundant inputs with reverse polarity
protection; Additional barrel connector cable
Power Consumption
-180 models:
4.6 Watts
-162 models:
6.0 Watts
Environment
-40 to +75°C Ext. operating temp.
-40 to +85°C storage temp.
5 – 95% humidity non-condensing
0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
UL 60950; cUL60950
EMI Compliance
CISPR22/EN55022; EN60950 Class A; FCC Class A; CE Mark;
EN61000-4-2; EN61000-4-3; EN61000-4-4; EN61000-4-5;
EN61000-4-6
Warranty
Lifetime
SISTM101x-1xx-LRT
SISTM101x-1xx-LRT
industrial switch
Industrial Switch 10/100BASE-TX to 100BASE-FX
Managed Redundant Industrial Switch
Incorporate Redundant Ring technol-
ogy into your industrial automation
network to increase reliability and
system uptime. Critical communi-
cation needs can now be protected
using redundant copper or fiber
links with switching recovery times
of less than 300ms. These 8-port
switches can be SNMP managed
via web browser to configure all of
the latest advanced industrial net-
working capability including IGMP
snooping, VLANs, QoS, port mirroring
and trunking.
Transition Networks’ Industrial
Switches are hardened devices de-
signed to reliably operate in harsh
environments such as those found on
factory floors, outdoor enclosures or
other hazardous environments.
ogy into your industrial automation
network to increase reliability and
system uptime. Critical communi-
cation needs can now be protected
using redundant copper or fiber
links with switching recovery times
of less than 300ms. These 8-port
switches can be SNMP managed
via web browser to configure all of
the latest advanced industrial net-
working capability including IGMP
snooping, VLANs, QoS, port mirroring
and trunking.
Transition Networks’ Industrial
Switches are hardened devices de-
signed to reliably operate in harsh
environments such as those found on
factory floors, outdoor enclosures or
other hazardous environments.
Features
4
AutoCross™ [
4
IEEE 802.1P, 4-level priority queuing
4
IGMP Snooping V1 with Query mode
4
Auto-Negotiation
4
IEEE 802.1Q VLAN capability
4
Redundant Ring Switching Technology
(recovery time < 300ms)
4
SNMP trap and SMTP
email trap support
4
SNTP Clock Synchronization
4
Bandwidth Allocation
4
Ingress Packet Filtering
4
DHCP Client Support
4
Spanning Tree/Rapid Spanning Tree
4
TFTP Firmware Update
4
Dual Homing Application Support
4
Auto-Sensing Redundant
DC Power Inputs
4
Dry Contact Relays
4
System Configuration
Restore/Backup
4
Extended (-40°C to 75°C)
operating temperature
4
Barrel connector interface cable
included for connecting external
AC/DC power supply
AC/DC power supply
Industrial Redundant Ring Topologies
Ordering Information
Extended Operating Temperature
-40°C to +75°C
SISTM1010-180-LRT
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
SISTM1011-162-LRT
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SISTM1013-162-LRT
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SISTM1014-162-LRT
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
Optional Accessories (sold separately)
External AC/DC Power Supply
SPS-UA12DHT
(100-240 VAC input
0°C to +70°C operating temperature)
25083
Universal AC/DC Input DIN Rail Mountable
+12 VDC Power Supply
Industrial Switch 10/100BASE-TX to 100BASE-FX