Transition Networks CTGFF4747-100 Leaflet
Point System™
Ordering Information
CTGFF4747-100
(2) Port 10GBase-xx open XFP
to Open XFP
CTGFF4848-100
(2) Port 10GBase-xx open SFP+
to Open SFP+
Optional Accessories (sold separately)
SFP+ Modules
TN-10GSFP-LR1
10GBase-LR/LW, SFP+
w/ Digital Diagnostics (DMI) 1310 DFB nm
[10 km/6.2 mi.] Link Budget: 6.4 dB
TN-10GSFP-LR2
10GBase-LR/LW, SFP+
w/ Digital Diagnostics (DMI) 1310 DFB nm
[20 km/12.4 mi.] Link Budget: 11.4 dB
TN-10GSFP-LR4
10GBase-LR/LW, SFP+
w/ Digital Diagnostics (DMI) 1310 DFB nm
[40 km/24.8 mi.] Link Budget: 16.5 dB
TN-10GSFP-LR7
10GBase-LR/LW, SFP+
w/ Digital Diagnostics (DMI) 1310 DFB nm
[70 km/43.4 mi.] Link Budget: 25 dB
TN-10GSFP-SR
10GBase-LR/LW, SFP+
w/ Digital Diagnostics (DMI) 850 DFB nm
[300/82/33 m; 985/269/108 ft.]
Link Budget: 2.6 dB
XFP Modules
TN-XFP-SR
10GBase-SR/SW/10G Fibre Channel, XFP
w/ Digital Diagnostics (DMI) 850nm (LC)
[62.5/125 uM: 33 m/108 ft.]
[50/125 uM with 500 MHZ-km: 269 ft.]
[50/125 uM: 300 m/985 ft.]
Modal dispersion 39.cB
TN-XFP-LR1
10GBase-LR/LW/10G Fibre Channel, XFP
w/Digital Diagnostics (DMI) 1310nm (LC)
[10 km/6.2 mi.] Link Budget: 6.2 dB
TN-XFP-LR2
10GBase-LR/LW/10G Fibre Channel, XFP
w/ Digital Diagnostics (DMI) 1310nm (LC)
[20 km/12.4 mi.] Link Budget: 12.0 dB
TN-XFP-ER
10GBase-LR/ER/10G Fibre Channel, XFP
w/ Digital Diagnostics (DMI) 1310nm (LC)
[40 km/24.9 mi.] Link Budget: 16.5 dB
TN-XFP-ZR
10GBase-LR/ER/10G Fibre Channel, XFP
w/ Digital Diagnostics (DMI) 1550nm (LC)
[80 km/49.7 mi.] Link Budget: 23.0 dB
The Transition Networks’ 10 Gigabit Ethernet fiber
to fiber converter is a two-port 10G pluggable media
converter, supporting a variety of XFP and SFP+
modules allowing network designers to utilize the
module to meet their network requirements.
The media converter can use either Transition Net-
works’ or third party MSA compatible 10G XFP or
SFP+ modules including support for the following
standards; 10GBase-SR, 10GBase-LR, 10GBase-ER,
10GBase-LRM, and 10GBase-ZR.
This converter provides 3R (reamplify, reshape, and
retime) optical signal regeneration.
to fiber converter is a two-port 10G pluggable media
converter, supporting a variety of XFP and SFP+
modules allowing network designers to utilize the
module to meet their network requirements.
The media converter can use either Transition Net-
works’ or third party MSA compatible 10G XFP or
SFP+ modules including support for the following
standards; 10GBase-SR, 10GBase-LR, 10GBase-ER,
10GBase-LRM, and 10GBase-ZR.
This converter provides 3R (reamplify, reshape, and
retime) optical signal regeneration.
Specifications
Standards
IEEE Std. 802.3ae, IEEE 802.3ak, IEEE 802.3ag, IEEE 802.3,
IEEE 802.3x, Multisource Agreement (MSA) XFP and SFP+
Data Rate
10 Gbps
Status LED
PWR (power): GREEN- power on
1LNK- fiber #1 link: GREEN- On link
1ACT- fiber #1 activity/fault: GREEN- BLINK activity,
YELLOW-
Fault
2LNK- fiber #2 link: GREEN- On link
2ACT- fiber #2 activity/fault: GREEN- BLINK activity,
YELLOW-
Fault
DIP Switches
SW1- Port 1 mode
UP: Limiting (xR); DOWN: Linear (LRM)
SW2- Port 2 mode
UP: Limiting (xR); DOWN: Linear (LRM)
SW3- LPT
UP: Enabled; DOWN: Disabled
SW4-
Interface loopback, forces each fiber to loop its RX to TX
Dimensions
Width: 1.72” [44 mm]
Depth: 5.0” [127 mm]
Height: 3.4” [86 mm]
Power Consumption
7 Watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
FCC Class A, EN55024 (CISPR22) Class A; CE Mark;
EN55022 Class A
Warranty Lifetime
CTGFFxxxx-100
CTGFFxxxx-100
point system™ slide-in-module media converter
10 Gigabit Ethernet Fiber to Fiber Converter Module
Features
4
Supports 10 Gigabit Ethernet Fiber to Fiber
full duplex conversion
4
LED Link Status Indicators
4
Link Pass Through
4
Auto Link Restore
4
Loopback
4
Supports +5V, +3.3V, and +1.8V MSA
compliant XFP modules
4
Supports 3R (Reamplify, Reshape, and
Retime) optical signal regeneration
4
For use in all Point System™ Chassis’
except for the 1-Slot Chassis
4
Manageable when installed in a managed
Point System™ Chassis
4
Supports 10GBase-Cx4 modules in the
CTGFF4747-100
10 Gigabit Ethernet Fiber to Fiber
Converter Application
Converter Application
10GBase-SR/LR/ER/ZR to10GBase-SR/LR/ER/ZR Optical Line Converter with XFP Slots
see also:
10GBase Optical Line Stand-Alone Media Converter
10GBase-SR/LR/ER/ZR to10GBase-SR/LR/ER/ZR Optical Line Converter with XFP Slots