Intel III Xeon 800 MHz 80526KZ800256 User Manual

 

64 

7.1 Weight 
 

The maximum weight of a processor and thermal solution is approximately 500 grams. 

7.2 Cartridge to Connector Mating Details 
 

The staggered edge connector layout makes the processor susceptible to damage from hot socketing 
(inserting the cartridge while power is applied to the connector).  Extra care should be taken to ensure hot 
socketing does not occur. The electrical and mechanical integrity of the processor edge fingers are specified 
for up to 50 insertion/extraction cycles. 

 

 

NOTES: 
4. 

Dimensional variation when cartridge is fully installed and the substrate is bottomed in the connector.  
Actual system installed height and tolerance is subject to the user’s manufacturing tolerance of SC330 
connector to the baseboard. 

5.  Retention devices for this cartridge must accommodate this cartridge “Float” relative to connector, 

without preload to the edge contacts in “X” and “Y” axes.  (See figure 22  for axis orientation) 

10.  Fully installed dimensions must be maintained by the user’s retention device.  Cartridge backout from 

fully installed position may not exceed 0.020.